Indiana Administrative Code
Title 327 - WATER POLLUTION CONTROL DIVISION
Article 8 - PUBLIC WATER SUPPLY
Rule 3.4 - Public Water System Wells
Section 3.4-17 - Pitless adapter unit requirements
Current through September 18, 2024
Authority: IC 13-14-8; IC 13-15-1-2; IC 13-15-2-1; IC 13-18-3-1; IC 13-18-4-1
Affected: IC 13-11-2; IC 13-13-5-1; IC 13-18-2
Sec. 17.
A production water well equipped with a pitless unit shall meet the following requirements:
(1) A pitless unit shall be:
(2) The discharge connection of a pitless unit shall be pressurized at all times.
(3) A pitless unit shall:
(4) At least one (1) check valve shall be installed inside the well casing if a submersible pump is used.
(5) A compression joint shall not be used for the installation of a pitless unit.
(6) A buried suction line is not permitted.
(7) A saddle-type pitless adapter is not permitted except at systems with a well casing and a diameter of six (6) inches or less. At these systems, a saddle-type pitless adapter may be used if: