Indiana Administrative Code
Title 327 - WATER POLLUTION CONTROL DIVISION
Article 8 - PUBLIC WATER SUPPLY
Rule 3.2 - Technical Standards for Water Mains
- Section 3.2-1 - Definitions
- Section 3.2-2 - Incorporation by reference
- Section 3.2-3 - Applicability
- Section 3.2-4 - Certification
- Section 3.2-5 - Additional information on construction permit applications
- Section 3.2-6 - Required easements; other permits
- Section 3.2-7 - Additional issuance requirements for construction permits
- Section 3.2-8 - Water main materials
- Section 3.2-9 - Separation of water mains from potential sources of contamination or damage
- Section 3.2-10 - Water mains near surface water bodies
- Section 3.2-11 - Flow rate and pressure in the water main
- Section 3.2-12 - Sizing of piping and accessories
- Section 3.2-13 - Use of dead-end mains
- Section 3.2-14 - Placement of isolation valves and air relief valves
- Section 3.2-15 - Fire and flushing hydrants
- Section 3.2-16 - Chamber drainage
- Section 3.2-17 - Installation
- Section 3.2-18 - Disinfection
- Section 3.2-19 - Cross connection control
- Section 3.2-20 - Technical standard alternative demonstration
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
