Indiana Administrative Code
Title 327 - WATER POLLUTION CONTROL DIVISION
Article 8 - PUBLIC WATER SUPPLY
Rule 2.1 - Consumer Confidence Reports
Section 2.1-6 - Other required information
Current through September 18, 2024
Authority: IC 13-13-5; IC 13-14-8-2; IC 13-14-8-7; IC 13-18-3-1; IC 13-18-3-2; IC 13-18-16-8; IC 13-18-16-9
Affected: IC 13-18-2; IC 13-18-16
Sec. 6.
(a) In order to convert MCLs to numbers greater than or equal to one and zero-tenths (1.0) for the required table referenced in section 3 of this rule, a CWS shall use the following table:
Table 6-1: Converting MCL Compliance Values for Consumer Confidence Reports
Contaminant | MCL in Compliance Units (mg/l) | multiply by... | MCL in CCR Units | MCLG in CCR Units |
Microbiological contaminants | ||||
1a. Total coliform bacteria1 | 5% of monthly samples are positive (CWSs that collect forty (40) or more samples per month); one (1) positive monthly sample (CWSs that collect fewer than forty (40) samples per month). | 5% of monthly samples are positive (CWSs that collect forty (40) or more samples per month); one (1) positive monthly sample (CWSs that collect fewer than forty (40) samples per month). | 0 | |
1b. Total coliform bateria2 | TT | TT | n/a | |
2a. Fecal coliform and E. coli1 | 0 | 0 | 0 | |
2b. E. coli2 | Routine and repeat samples are total coliform-positive and either is E. coli-positive or the CWS fails to take repeat samples following E. coli-positive routine sample or the CWS fails to analyze total coliform-positive repeat sample for E. coli. | Routine and repeat samples are total coliform-positive and either is E. coli-positive or the CWS fails to take repeat samples following E. coli-positive routine sample or the CWS fails to analyze total coliform-positive repeat sample for E. coli. | 0 | |
3. Total organic carbon | TT | TT | n/a | |
4. Turbidity | TT | TT (NTU) | n/a | |
Radioactive contaminants | ||||
5. Beta/photon emitters | 4 mrem/year | 4 mrem/year | 0 | |
6. Alpha emitters | 15 pCi/1 | 15 pCi/1 | 0 | |
7. Combined radium | 5 pCi/1 | 5 pCi/1 | 0 | |
8. Uranium | 0.030 | 1,000 | 30 ppb | 0 |
Inorganic contaminants | ||||
9. Antimony | 0.006 | 1,000 | 6 ppb | 6 |
10. Arsenic | 0.010 3 | 1,000 | 101 ppb | 01 |
11. Asbestos | 7 MFL | 7 MFL | 7 | |
12. Barium | 2 | 2 ppm | 2 | |
13. Beryllium | 0.004 | 1,000 | 4 ppb | 4 |
14. Bromate | 0.10 | 1,000 | 10 ppb | 0 |
15. Cadmium | 0.005 | 1,000 | 5 ppb | 5 |
16. Chloramines | MRDL = 4.0 | MRDL = 4.0 ppm | MRDLG = 4 | |
17. Chlorine | MRDL = 4.0 | MRDL = 4.0 ppm | MRDLG = 4 | |
18. Chlorine dioxide | MRDL = 0.8 | 1,000 | MRDL = 800 ppb | MRDLG = 800 |
19. Chlorite | 1 | 1 ppm | 0.8 | |
20. Chromium | 0.1 | 1,000 | 100 ppb | 100 |
21.Copper | AL = 1.3 | AL = 1.3 ppm | 1.3 | |
22. Cyanide | 0.2 | 1,000 | 200 ppb | 200 |
23. Fluoride | 4 | 4 ppm | 4 | |
24. Lead | AL = 0.015 | 1,000 | AL = 15 ppb | 0 |
25. Mercury (inorganic) | 0.002 | 1,000 | 2 ppb | 2 |
26. Nitrate (as nitrogen) | 10 | 10 ppm | 10 | |
27. Nitrite (as nitrogen) | 1 | 1 ppm | 1 | |
28. Selenium | 0.05 | 1,000 | 50 ppb | 50 |
29. Thallium | 0.002 | 1,000 | 2 ppb | 0.5 |
Synthetic organic contaminants including pesticides and herbicides | ||||
30. 2,4-D | 0.07 | 1,000 | 70 ppb | 70 |
31. 2,4,5-TP (silvex) | 0.05 | 1,000 | 50 ppb | 50 |
32. Acrylamide | TT | TT | 0 | |
33. Alachlor | 0.002 | 1,000 | 2 ppb | 0 |
34. Atrazine | 0.003 | 1,000 | 3 ppb | 3 |
35. Benzo(a)pyrene (PAH) | 0.0002 | 1,000,000 | 200 ppt | 0 |
36. Carbofuran | 0.04 | 1,000 | 40 ppb | 40 |
37. Chlordane | 0.002 | 1,000 | 2 ppb | 0 |
38. Dalapon | 0.2 | 1,000 | 200 ppb | 200 |
39. Di(2-ethylhexyl)adipate | .4 | 1,000 | 400 ppb | 400 |
40. Di(2-ethylhexyl)phthalate | 0.006 | 1,000 | 6 ppb | 0 |
41. Dibromochloropropane | 0.0002 | 1,000,000 | 200 ppt | 0 |
42. Dinoseb | 0.007 | 1,000 | 7 ppb | 7 |
43. Diquat | 0.02 | 1,000 | 20 ppb | 20 |
44. Dioxin (2,3,7,8-TCDD) | 0.00000003 | 1,000,000,000 | 30 ppq | 0 |
45. Endothall | 0.1 | 1,000 | 100 ppb | 100 |
46. Endrin | 0.002 | 1,000 | 2 ppb | 2 |
47. Epichlorohydrin | TT | TT | 0 | |
48. Ethylene dibromide | 0.00005 | 1,000,000 | 50 ppt | 0 |
49. Glyphosate | 0.7 | 1,000 | 700 ppb | 700 |
50. Heptachlor | 0.0004 | 1,000,000 | 400 ppt | 0 |
51. Heptachlor epoxide | 0.0002 | 1,000,000 | 200 ppt | 0 |
52. Hexachlorobenzene | 0.001 | 1,000 | 1 ppb | 0 |
53. Hexachlorocyclopentadie ne | 0.05 | 1,000 | 50 ppb | 50 |
54. Lindane | 0.0002 | 1,000,000 | 200 ppt | 200 |
55. Methoxychlor | 0.04 | 1,000 | 40 ppb | 40 |
56. Oxamyl (vydate) | 0.2 | 1,000 | 200 ppb | 200 |
57. PCBs (polychlorinated biphenyls) | 0.0005 | 1,000,000 | 500 ppt | 0 |
58. Pentachlorophenol | 0.001 | 1,000 | 1 ppb | 0 |
59. Picloram | 0.5 | 1,000 | 500 ppb | 500 |
60. Simazine | 0.004 | 1,000 | 4 ppb | 4 |
61. Toxaphene | 0.003 | 1,000 | 3 ppb | 0 |
Volatile organic contamina | nts | |||
62. Benzene | 0.005 | 1,000 | 5 ppb | 0 |
63. Carbon tetrachloride | 0.005 | 1,000 | 5 ppb | 0 |
64. Chlorobenzene | 0.1 | 1,000 | 100 ppb | 100 |
65. o-Dichlorobenzene | 0.6 | 1,000 | 600 ppb | 600 |
66. p-Dichlorobenzene | 0.075 | 1,000 | 75 ppb | 75 |
67. 1,2-Dichloroethane | 0.005 | 1,000 | 5 ppb | 0 |
68. 1,1-Dichloroethylene | 0.007 | 1,000 | 7 ppb | 7 |
69. cis-1,2-Dichloroethylene | 0.07 | 1,000 | 70 ppb | 70 |
70. trans-1,2-Dichloroethylene | 0.1 | 1,000 | 100 ppb | 100 |
71. Dichloromethane | 0.005 | 1,000 | 5 ppb | 0 |
72. 1,2-Dichloropropane | 0.005 | 1,000 | 5 ppb | 0 |
73. Ethylbenzene | 0.7 | 1,000 | 700 ppb | 700 |
74. HAA5 | 0.060 | 1,000 | 60 ppb | n/a |
75. Styrene | 0.1 | 1,000 | 100 ppb | 100 |
76. Tetrachloroethylene | 0.005 | 1,000 | 5 ppb | 0 |
77. 1,2,4-Trichlorobenzene | 0.07 | 1,000 | 70 ppb | 70 |
78. 1,1,1-Trichloroethane | 0.2 | 1,000 | 200 ppb | 200 |
79. 1,1,2-Trichloroethane | 0.005 | 1,000 | 5 ppb | 3 |
80. Trichloroethylene | 0.005 | 1,000 | 5 ppb | 0 |
81. TTHMs (total trihalomethanes) | 0.080 | 1,000 | 80 ppb | n/a |
82. Toluene | 1 | 1 ppm | 1 | |
83. Vinyl chloride | 0.002 | 1,000 | 2 ppb | 0 |
84. Xylenes | 10 | 10 ppm | 10 |
Key:
AL = Action level.
MCL = Maximum contaminant level.
MCLG = Maximum contaminant level goal.
MFL = Million fibers per liter.
MRDL = Maximum residual disinfectant level.
MRDLG = Maximum residual disinfectant level goal.
mrem/year = Millirems per year (a measure of radiation absorbed by the body).
N/A = Not applicable
NTU = Nephelometric turbidity units.
pCi/l = Picocuries per liter (a measure of radioactivity).
ppm = Parts per million, or milligrams per liter (mg/l).
ppb = Parts per billion, or micrograms per liter (µg/l).
ppt = Parts per trillion, or nanograms per liter (ng/l).
ppq = Parts per quadrillion, or picograms per liter (pg/l).
TT = Treatment technique.
(b) In order to show potential sources of contamination for the table required by section 3 of this rule, a CWS shall use the following table:
Table 6-2: Regulated Contaminants
Contaminant (units) | MCLG | MCL | Major Sources in Drinking Water |
Microbiological contaminants | |||
1a. Total coliform bacteria1 | 0 | 5% of monthly samples are positive (CWSs that collect forty (40) or more samples per month); one (1) positive monthly sample (CWSs that collect fewer than forty (40) samples per month). | Naturally present in the environment. |
1b. Total coliform bacteria2 | n/a | TT | Naturally present in the environment. |
2a. Fecal coliform and E. coli1 | 0 | A routine sample and a repeat sample are total coliform positive, and one (1) is also fecal coliform or E. coli positive. | Human and animal fecal waste. |
2b. E. coli2 | 0 | Routine and repeat samples are total coliform-positive and either is E. coli-positive or the CWS fails to take repeat samples following E. coli-positive routine sample or the CWS fails to analyze total coliform-positive repeat sample for E. coli. | Human and animal fecal waste. |
3. Total organic carbon | n/a | TT | Naturally present in the environment. |
4. Turbidity | n/a | TT | Soil run-off. |
Radioactive contaminants | |||
5. Beta/photon emitters (mrem/year) | 0 | 4 | Decay of natural and manmade deposits. |
6. Alpha emitters (pCi/1) | 0 | 15 | Erosion of natural deposits. |
7. Combined radium (pCi/1) | 0 | 5 | Erosion of natural deposits. |
8. Uranium (ppb) | 0 | 30 | Erosion of natural deposits. |
Inorganic contaminants | |||
9. Antimony (ppb) | 6 | 6 | Discharge from petroleum refineries; fire retardants; ceramics; electronics; solder. |
10. Arsenic (ppb) | 0 3 | 10 3 | Erosion of natural deposits; run-off from orchards; runoff from glass and electronics production wastes. |
11. Asbestos (MFL) | 7 | 7 | Decay of asbestos cement water mains; erosion of natural deposits. |
12. Barium (ppm) | 2 | 2 | Discharge of drilling wastes; discharge from metal refineries; erosion of natural deposits. |
13. Beryllium (ppb) | 4 | 4 | Discharge from metal refineries and coal-burning factories; discharge from electrical, aerospace, and defense industries. |
14. Bromate (ppb) | 0 | 10 | Byproduct of drinking water disinfection. |
15. Cadmium (ppb) | 5 | 5 | Corrosion of galvanized pipes; erosion of natural deposits; discharge from metal refineries; run-off from waste batteries and paints. |
16. Chloramines (ppm) | MRDLG = 4 | MRDL = 4.0 | Water additive used to control microbes. |
17. Chlorine (ppm) | MRDLG = 4 | MRDL = 4.0 | Water additive used to control microbes. |
18. Chlorine dioxide (ppb) | MRDLG = 800 | MRDL = 800 | Water additive used to control microbes. |
19. Chlorite (ppm) | 0.8 | 1 | Byproduct of drinking water disinfection. |
20. Chromium (ppb) | 100 | 100 | Discharge from steel and pulp mills; erosion of natural deposits. |
21. Copper (ppm) | 1.3 | AL = 1.3 | Corrosion of household plumbing systems; erosion of natural deposits; leaching from wood preservatives. |
22. Cyanide (ppb) | 200 | 200 | Discharge from steel/metal factories; discharge from plastic and fertilizer factories. |
23. Fluoride (ppm) | 4 | 4 | Erosion of natural deposits; water additive that promotes strong teeth; discharge from fertilizer and aluminum factories. |
24. Lead (ppb) | 0 | AL = 15 | Corrosion of household plumbing systems; erosion of natural deposits. |
25. Mercury (inorganic) (ppb) | 2 | 2 | Erosion of natural deposits; discharge from refineries and factories; run-off from landfills; run-off from cropland. |
26. Nitrate (as nitrogen) (ppm) | 10 | 10 | Run-off from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits. |
27. Nitrite (as nitrogen) (ppm) | 1 | 1 | Run-off from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits. |
28. Selenium (ppb) | 50 | 50 | Discharge from petroleum and metal refineries; erosion of natural deposits; discharge from mines. |
29. Thallium (ppb) | 0.5 | 2 | Leaching from ore-processing sites; discharge from electronics, glass, and drug factories. |
Synthetic organic contaminants, including pesticides and herbicides | |||
30. 2,4-D (ppb) | 70 | 70 | Run-off from herbicide used on row crops. |
31. 2,4,5-TP (Silvex) (ppb) | 50 | 50 | Residue of banned herbicide. |
32. Acrylamide | 0 | TT | Added to water during sewage/wastewater treatment. |
33. Alachlor (ppb) | 0 | 2 | Run-off from herbicide used on row crops. |
34. Atrazine (ppb) | 3 | 3 | Run-off from herbicide used on row crops. |
35. Benzo(a)pyrene (PAH) (ppt) | 0 | 200 | Leaching from linings of water storage tanks and distribution lines. |
36. Carbofuran (ppb) | 40 | 40 | Leaching of soil fumigant used on rice and alfalfa. |
37. Chlordane (ppb) | 0 | 2 | Residue of banned termiticide. |
38. Dalapon (ppb) | 200 | 200 | Run-off from herbicide used on rights-of-way. |
39. Di(2-ethylhexyl)adipate (ppb) | 400 | 400 | Discharge from chemical factories. |
40. Di(2-ethylhexyl)phthalate (ppb) | 0 | 6 | Discharge from rubber and chemical factories. |
41. Dibromochloropropane (ppt) | 0 | 200 | Run-off/leaching from soil fumigant used on soybeans, cotton, pineapples, and orchards. |
42. Dinoseb (ppb) | 7 | 7 | Run-off from herbicide used on soybeans and vegetables. |
43. Diquat (ppb) | 20 | 20 | Run-off from herbicide use. |
44. Dioxin (2,3,7,8-TCDD) (ppq) | 0 | 30 | Emissions from waste incineration and other combustion; discharge from chemical factories. |
45. Endothall (ppb) | 100 | 100 | Run-off from herbicide use. |
46. Endrin (ppb) | 2 | 2 | Residue of banned insecticide. |
47. Epichlorohydrin | 0 | TT | Discharge from industrial chemical factories; an impurity of some water treatment chemicals. |
48. Ethylene dibromide (ppt) | 0 | 50 | Discharge from petroleum refineries. |
49. Glyphosate (ppb) | 700 | 700 | Run-off from herbicide use. |
50. Heptachlor (ppt) | 0 | 400 | Residue of banned pesticide. |
51. Heptachlor epoxide (ppt) | 0 | 200 | Breakdown of heptachlor. |
52. Hexachlorobenzene (ppb) | 0 | 1 | Discharge from metal refineries and agricultural chemical factories. |
53. Hexachlorocyclopentadiene (ppb) | 50 | 50 | Discharge from chemical factories. |
54. Lindane (ppt) | 200 | 200 | Run-off/leaching from insecticide used on cattle, lumber, and gardens. |
55. Methoxychlor (ppb) | 40 | 40 | Run-off/leaching from insecticide used on fruits, vegetables, alfalfa, and livestock. |
56. Oxamyl (vydate) (ppb) | 200 | 200 | Run-off/leaching from insecticide used on apples, potatoes, and tomatoes. |
57. PCBs (polychlorinated biphenyls) (ppt) | 0 | 500 | Run-off from landfills; discharge of waste chemicals. |
58. Pentachlorophenol (ppb) | 0 | 1 | Discharge from wood preserving factories. |
59. Picloram (ppb) | 500 | 500 | Herbicide run-off. |
60. Simazine (ppb) | 4 | 4 | Herbicide run-off. |
61. Toxaphene (ppb) | 0 | 3 | Run-off/leaching from insecticide used on cotton and cattle. |
Volatile organic contaminants | |||
62. Benzene (ppb) | 0 | 5 | Discharge from factories; leaching from gas storage tanks and landfills. |
63. Carbon tetrachloride (ppb) | 0 | 5 | Discharge from chemical plants and other industrial activities. |
64. Chlorobenzene (ppb) | 100 | 100 | Discharge from chemical and agricultural chemical factories. |
65. o-Dichlorobenzene (ppb) | 600 | 600 | Discharge from industrial chemical factories. |
66. p-Dichlorobenzene (ppb) | 75 | 75 | Discharge from industrial chemical factories. |
67. 1,2-Dichloroethane (ppb) | 0 | 5 | Discharge from industrial chemical factories. |
68. 1,1-Dichloroethylene (ppb) | 7 | 7 | Discharge from industrial chemical factories. |
69. cis-1,2-Dichloroethylene (ppb) | 70 | 70 | Discharge from industrial chemical factories. |
70. trans-1,2-Dichloroethylene (ppb) | 100 | 100 | Discharge from industrial chemical factories. |
71. Dichloromethane (ppb) | 0 | 5 | Discharge from pharmaceutical and chemical factories. |
72. 1,2-Dichloropropane (ppb) | 0 | 5 | Discharge from industrial chemical factories. |
73. Ethylbenzene (ppb) | 700 | 700 | Discharge from petroleum refineries. |
74. HAA5 (ppb) | n/a | 60 | Byproduct of drinking water disinfection. |
75. Styrene (ppb) | 100 | 100 | Discharge from rubber and plastic factories; leaching from landfills. |
76. Tetrachloroethylene (ppb) | 0 | 5 | Discharge from factories and dry cleaners. |
77. 1,2,4-Trichlorobenzene (ppb) | 70 | 70 | Discharge from textile-finishing factories. |
78. 1,1,1-Trichloroethane (ppb) | 200 | 200 | Discharge from metal degreasing sites and other factories. |
79. 1,1,2-Trichloroethane (ppb) | 3 | 5 | Discharge from industrial chemical factories. |
80. Trichloroethylene (ppb) | 0 | 5 | Discharge from metal degreasing sites and other factories. |
81. TTHMs (total trihalomethanes) (ppb) | n/a | 80 | Byproduct of drinking water chlorination. |
82. Toluene (ppm) | 1 | 1 | Discharge from petroleum factories. |
83. Vinyl chloride (ppb) | 0 | 2 | Leaching from PVC piping; discharge from plastics factories. |
84. Xylenes (ppm) | 10 | 10 | Discharge from petroleum factories; discharge from chemical factories. |
Key:
AL = Action level.
MCL = Maximum contaminant level.
MCLG = Maximum contaminant level goal.
MFL = Million fibers per liter.
MRDL = Maximum residual disinfectant level.
MRDLG = Maximum residual disinfectant level goal.
mrem/year = millirems per year (a measure of radiation absorbed by the body).
N/A = Not applicable.
NTU = Nephelometric turbidity units.
pCi/l = Picocuries per liter (a measure of radioactivity).
ppm = Parts per million, or milligrams per liter (mg/l).
ppb = Parts per billion, or micrograms per liter ([MICRO];g/l).
ppt = Parts per trillion, or nanograms per liter (ng/l).
ppq = Parts per quadrillion, or picograms per liter (pg/l).
TT = Treatment technique.
(c) The language in section 17 of this rule must be used if there is a violation referenced in section 3 of this rule and health effects language is required.