Indiana Administrative Code
Title 327 - WATER POLLUTION CONTROL DIVISION
Article 7.1 - WASTEWATER MANAGEMENT
Rule 6 - Septage Vehicle Operation
Section 6-6 - Vehicle identification requirements
Universal Citation: 327 IN Admin Code 6-6
Current through March 20, 2024
Authority: IC 13-14-8; IC 13-18-12-4
Affected: IC 13-18-12
Sec. 6.
A septage management vehicle must meet the following vehicle identification requirements:
(1) Both vehicle doors or both vertical front quarters of the tank must have the following information:
(A) The business
name.
(B) The business phone
number.
(C) The word "IDEM"
followed by the assigned septage management permit number.
(2) The identification information in subdivision (1) must be:
(A) a minimum of
three-eighths (3/8) inch in width;
(B) a minimum of two (2) inches tall;
and
(C) in a color contrasting with
the background.
(3) The maximum capacity of the vehicle tank must be visible at all times:
(A) either on both sides of the tank or at
the rear of the tank; and
(B) in
letters and numbers at least two (2) inches tall.
(4) The identification information must be maintained in a legible condition at all times.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
