Indiana Administrative Code
Title 327 - WATER POLLUTION CONTROL DIVISION
Article 7.1 - WASTEWATER MANAGEMENT
Rule 6 - Septage Vehicle Operation
Section 6-3 - Vehicle pumping system requirements
Universal Citation: 327 IN Admin Code 6-3
Current through March 20, 2024
Authority: IC 13-14-8; IC 13-18-12-4
Affected: IC 13-18-12
Sec. 3.
A vehicle pumping system must meet the following requirements:
(1) The inlet and discharge of the sewage pumps must be a minimum of two and one-half (2 ½) inches in diameter.
(2) The vehicle engine intake manifold must not be used as a vacuum source.
(3) The pump installation must prevent leakage.
(4) All exposed connections or openings must be made watertight with caps or plugs when the pumping system is being used to transfer liquid or septage.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
