Authority: IC 13-14-8-7; IC 13-15-1-2; IC 13-15-2-1; IC
13-18-3-1; IC 13-18-12-4
Sec. 4.
(a) Any
person who prepares a biosolid or industrial waste product and that holds a
marketing and distribution permit shall comply with the following:
(1) All permit conditions.
(2) The person who prepares a biosolid or
industrial waste product shall develop and distribute an information sheet that
includes the following:
(A) The name and
address of the person who prepared the biosolid or industrial waste product
that is marketed or distributed for application to the land.
(B) A statement that application of the
biosolid or industrial waste product is prohibited, except in accordance with
the instructions on the information sheet.
(C) Quality criteria based on current
analytical data for the biosolid or industrial waste product.
(D) Recommended maximum application rates
based upon nutrient content.
(E)
For the information sheet for an industrial waste product or a biosolid
containing an industrial waste product containing more than two (2) milligrams
per kilogram cadmium, a statement that the soil pH must be at least 6.5 when
applied to land for food crops.
(F)
For the information sheet for a biosolid or an industrial waste product
containing more than forty (40) milligrams per kilogram of molybdenum, a
statement that the biosolid or the industrial waste product must not be applied
to pasture.
(3) This
information sheet must be:
(A) kept on file
for the duration of the permit and for five (5) years following the expiration
of the permit;
(B) updated
quarterly or as specified in the permit; and
(C) be accessible to department
representatives at the facility or other location approved by the
commissioner.
(4) Each
person who prepares a biosolid or industrial waste product is responsible for
informing users of a biosolid or industrial waste product of the biosolid or
industrial waste product quality and proper amounts for specific
needs.
(5) Annual reports must be
submitted on forms and in a format prescribed by the commissioner by January 31
of each subsequent year. The report must include the following information:
(A) The biosolid or industrial waste product
quantity distributed or marketed.
(B) An updated copy of the information sheet
to be distributed with the biosolid or industrial waste product.
(C) The analytical data required under
subsection (b).
(b) The person who prepares a biosolid or
industrial waste product under a marketing and distribution permit shall
collect and analyze representative samples for the parameters listed in
327 IAC 6.1-4-16(e)
and
327 IAC 6.1-4-16(i)
at the applicable frequency listed in Table
6 in
327 IAC
6.1-4-16(f), except for biosolid or
industrial waste product in quantities of less than three hundred nineteen
(319) dry tons per three hundred sixty-five (365) day period that must be
monitored at least twice per year.
(c) The person who prepares a biosolid or
industrial waste product under a marketing and distribution permit in this rule
shall develop the following information and shall retain the information for
five (5) years:
(1) Analyses conducted in
accordance with subsection (b).
(2)
A certification statement on forms prescribed by the commissioner.
(3) A description of how the Class A pathogen
requirements in
327 IAC 6.1-4-13(b)
are met.
(4) A description of how one (1) of the
vector attraction reduction requirements in
327 IAC
6.1-4-15(b)(1) through
327 IAC
6.1-4-15(b)(8) are met.
(5) Copies of all written notifications for
noncomplying use of the biosolid or industrial waste product that have been
sent to users.
(6) The name and
address of recipients of more than one (1) dry ton per calendar
quarter.
