Indiana Administrative Code
Title 326 - AIR POLLUTION CONTROL DIVISION
Article 8 - VOLATILE ORGANIC COMPOUND RULES
Rule 10 - Automobile Refinishing
Section 10-3 - Requirements

Universal Citation: 326 IN Admin Code 10-3

Current through March 20, 2024

Authority: IC 13-14-8; IC 13-17-3-4

Affected: IC 13-12

Sec. 3.

(a) Each manufacturer or distributor of coatings or surface preparation products manufactured or distributed for use in Indiana shall comply with the following:

(1) The VOC content limits listed in section 4(a) of this rule.

(2) The compliance procedures outlined in section 6(a) of this rule.

(b) Any person commercially providing refinishing coatings or surface preparation products for use in Indiana that were manufactured after January 11, 1999, shall comply with the following:

(1) The VOC content limits listed in section 4(a) of this rule.

(2) The compliance procedures outlined in section 6(b) of this rule.

(c) Any person applying any coating or surface preparation product in Indiana shall comply with the following:

(1) The provisions of section 4 of this rule.

(2) The work practice standards of section 5 of this rule.

(3) The compliance procedures outlined in section 6(c) of this rule.

(4) The test procedures in section 7 of this rule.

(5) The record keeping and reporting provisions in section 9 of this rule.

(d) No person shall solicit or require any refinishing facility subject to this rule to use a refinishing coating or surface preparation product that does not comply with the VOC content limits listed in section 4(a) of this rule.

Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.