Current through March 20, 2024
Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17
Sec. 11.
(a) This
section applies to any owner or operator of a coating source that:
(1) uses daily-weighted averaging on the
coating facility to comply with volatile organic compound (VOC) emission
limits; and
(2) meets any of the
applicability criteria that follow:
(A) 326
IAC 8-5-5(a)(1);
(B) 326 IAC
8-5-5(a)(2); or
(C) 326 IAC
8-5-5(a)(3)(A).
(b) Upon startup of a new coating facility,
or upon changing the method of compliance for an existing coating facility from
the use of compliant coatings or control devices to daily-weighted averaging,
the owner or operator of a coating facility identified in subsection (a) shall
certify to the department that the coating facility is in compliance with the
requirements of this section. The certification shall include:
(1) The name and location of the
source.
(2) The address and
telephone number of the person responsible for the source.
(3) Identification of each coating facility
and identification of the applicable emission limitation.
(4) The name and identification number of
each coating facility that will comply by means of daily-weighted
averaging.
(5) The VOC content of
each coating, as applied, each day for each coating facility, expressed in
units necessary to determine compliance.
(6) The instrument or method by which the
owner or operator will accurately measure or calculate the VOC content of each
coating and the volume of each coating, as applied, used each day at each
coating facility.
(7) The method by
which the owner or operator will create and maintain records each day as
required in subsection (c).
(8)
Calculation of the daily-weighted average for a day representative of current
or projected maximum production levels.
(9) The time at which the coating facility's
day begins if a time other than midnight local time is used to define a
day.
(c) On and after
May 1, 1997, or upon initial startup of a new coating facility, or upon
changing the method of compliance for an existing coating facility from the use
of compliant coatings or control devices to daily-weighted averaging, the owner
or operator of a coating facility identified in subsection (a) shall for each
coating facility and for each coating used collect and record each day, and
maintain all of the following information:
(1)
The name and identification number of each coating, as applied.
(2) The mass of VOC per volume (excluding
water and exempt compounds) and the volume of each coating (excluding water and
exempt compounds), as applied, or the VOC content and the volume of each
coating, as applied, expressed in units necessary to determine
compliance.
(3) The daily-weighted
average VOC content of all coatings, in each coating facility.
(d) On and after May 1, 1997, the
owner or operator of a coating facility identified in subsection (a) shall
notify the department in either of the following instances:
(1) Any record showing noncompliance with the
applicable daily-weighted average requirements shall be reported by submitting
a copy of the record to the department within thirty (30) days following
noncompliance; such record shall also be submitted with the quarterly
compliance report. The following information shall accompany each submittal:
(A) Name and location of the coating
facility.
(B) Date and duration of
the noncompliance.
(C) Corrective
action taken.
(2) At
least thirty (30) calendar days before changing the method of compliance from
daily-weighted averaging to compliant coatings or control devices, the owner or
operator shall comply with all requirements of section 10(b) or 12(b) of this
rule, respectively. Upon changing the method of compliance from daily-weighted
averaging to the use of compliant coatings or control devices, the owner or
operator shall comply with all requirements of section 10 or 12 of this rule,
respectively.
