Current through March 20, 2024
Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17
Sec. 10.
(a) This
section applies to any coating source that:
(1) uses compliant coatings to comply with
volatile organic compounds (VOC) emission limits; and
(2) meets any of the applicability criteria
that follow:
(A) 326 IAC
8-5-5(a)(1);
(B) 326 IAC
8-5-5(a)(2); or
(C) 326 IAC
8-5-5(a)(3)(A).
(b) Upon startup of a new coating facility,
or upon changing the method of compliance for an existing coating facility from
daily-weighted averaging or control devices to the use of compliant coatings,
the owner or operator of the coating source identified in subsection (a) shall
certify to the department that the coating facility is in compliance with the
requirements of this section. The certification shall include the following:
(1) The name and location of the
source.
(2) The name, address, and
telephone number of the person responsible for the source.
(3) Identification of each VOC emitting
coating facility and identification of the applicable emission
limitation.
(4) The name and
identification number of each coating, as applied, used at each coating
facility.
(5) The mass of VOC
(excluding water and exempt compounds) per volume of coating and the volume of
each coating, as applied.
(c) By May 1, 1997, or upon startup of a new
coating facility, or upon changing the method of compliance for an existing
coating facility from daily-weighted averaging or control devices to the use of
compliant coatings, the owner or operator of a coating facility identified in
subsection (a) shall for each coating facility and for each coating used
collect and record each day and maintain all of the following information:
(1) The name and identification number of
each coating, as applied.
(2) The
mass of VOC (excluding water and exempt compounds) per volume of coating for
each coating, as applied, or the VOC content of each coating, as applied,
expressed in units necessary to determine compliance.
(3) As new compliant coatings are added to a
coating facility, the records required by this subsection shall be updated to
include the new coating.
(4) If use
of a coating is discontinued, the records required by this section shall be
maintained consistent with section 9(c) of this rule.
(d) By May 1, 1997, the owner or operator of
a coating facility identified in subsection (a) shall notify the department in
either of the following instances:
(1) Any
record showing use of any noncompliant coatings shall be reported by submitting
a copy of the record to the department within thirty (30) days following use;
such record shall also be submitted with the quarterly compliance report. The
following information shall accompany each submittal:
(A) Name and location of the coating
facility.
(B) Time, date, and
duration of the noncompliance.
(C)
Corrective action taken.
(2) At least thirty (30) calendar days before
changing the method of compliance from the use of compliant coatings to
daily-weighted averaging or control devices, the owner or operator shall comply
with all requirements of section 11(b) or 12(b) of this rule, respectively.
Upon changing the method of compliance for a coating facility from the use of
compliant coatings to daily-weighted averaging or control devices, the owner or
operator shall comply with all requirements of section 11 or 12 of this rule,
respectively.
