Indiana Administrative Code
Title 326 - AIR POLLUTION CONTROL DIVISION
Article 1 - GENERAL PROVISIONS
Rule 2 - Definitions
Section 2-59 - "Process weight; weight rate" defined
Universal Citation: 326 IN Admin Code 2-59
Current through March 20, 2024
Authority: IC 13-1-1-4; IC 13-7-7
Affected: IC 13-1-1-2; IC 13-7-1
Sec. 59.
(a) Process weight: The total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight but liquid and gaseous fuels and combustion air will not.
(b) Process weight rate:
(1) For continuous or long-run, steady-state
source operations, the total process weight for the entire period of continuous
operation or for a typical portion thereof, divided by the number of hours of
such period or portion thereof.
(2)
For a cyclical or batch source operation, the total process weight for a period
that covers a complete operation or an integral number of cycles, divided by
the hours of actual process operation during such a period.
When the nature of any process or operation or the design of any equipment is such as to permit more than one interpretation for this definition, the interpretation that results in the minimum value for allowable emission shall apply.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
