Indiana Administrative Code
Title 170 - INDIANA UTILITY REGULATORY COMMISSION
Article 6 - WATER UTILITIES
Rule 1 - Standards of Service
Section 1-6 - Meter register
Universal Citation: 170 IN Admin Code 1-6
Current through March 20, 2024
Authority: IC 8-1-1-3; IC 8-1-2-4
Affected: IC 8-1-2
Sec. 6.
(a) All meters used to measure the volume of water sales shall register in:
(1) U.S. gallons;
(2) cubic feet; or
(3) metric units.
(b) The meter register face shall clearly indicate whether the register is in:
(1) U.S.
gallons;
(2) cubic feet;
or
(3) metric units.
(c) Registers shall have the required numerals on the register's face, so that the meter can be correctly read to the nearest:
(1) one hundred (100)
cubic feet;
(2) one thousand
(1,000) U.S. gallons; or
(3) metric
equivalent thereof.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
