Indiana Administrative Code
Title 170 - INDIANA UTILITY REGULATORY COMMISSION
Article 5 - GAS UTILITIES
Rule 1 - Standards of Service
Section 1-8 - Meter accuracy; error rates
Universal Citation: 170 IN Admin Code 1-8
Current through September 18, 2024
Authority: IC 8-1-1-3; IC 8-1-2-4
Affected: IC 8-1-2
Sec. 8.
Every gas service meter, whether new, repaired, or removed from service for any cause, when installed for the use of any customer, must be in good order and must have been adjusted to be as near zero (0) error as practicable, but not more than one and one-half percent (1 1/2%), plus or minus, in error when gas is flowing, at its check rate. Every meter shall also be adjusted so that the accuracy at open rate or full flow shall be within one percent (1%), plus or minus, of the accuracy at its check flow. The error of the meter shall be the average error of the check and open rates.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.