Illinois Administrative Code
Title 92 - TRANSPORTATION
Part 442 - MINIMUM SAFETY STANDARDS FOR CONSTRUCTION OF TYPE II SCHOOL BUSES
Subpart B - CONSTRUCTION OF BODY
Section 442.285 - Stop Signal Arm Panel

Universal Citation: 92 IL Admin Code ยง 442.285

Current through Register Vol. 48, No. 38, September 20, 2024

a) A stop signal arm panel must be installed on the left side of the bus that conforms to 49 CFR 571.131. Decals may be used in lieu of painting. Strobe lamps are acceptable on stop signal arm panels. See Appendix E for example.

b) Additional stop signal arm panels may be added at the purchaser's request. Additional panels must be located on the left side of the bus. Additional panels must operate in conjunction with the required panel and meet all stop arm panel requirements except as follows. The additional panel must not contain any marking or reflective material on the front side of the panel. The additional panel must be located in the rear half of the bus adjacent to the rearmost window.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.