Illinois Administrative Code
Title 92 - TRANSPORTATION
Part 442 - MINIMUM SAFETY STANDARDS FOR CONSTRUCTION OF TYPE II SCHOOL BUSES
Subpart B - CONSTRUCTION OF BODY
Section 442.265 - Seat Belts, Driver's and Passengers'

Current through Register Vol. 48, No. 38, September 20, 2024

a) See the FMVSS for requirements ( 49 CFR 571.209 and 210).

b) The driver's seat belt assembly shall be arranged so that all portions of the assembly remain above the floor when not in use.

c) If a retractor or retractors are installed, they shall be the emergency locking type.

d) The driver's seat must be equipped with a lap belt/shoulder harness design.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.