Illinois Administrative Code
Title 92 - TRANSPORTATION
Part 442 - MINIMUM SAFETY STANDARDS FOR CONSTRUCTION OF TYPE II SCHOOL BUSES
Subpart B - CONSTRUCTION OF BODY
Section 442.260 - Rub Rails

Current through Register Vol. 48, No. 38, September 20, 2024

a) There shall be one rub rail located approximately at seat level which shall extend from the rear of the entrance door on both sides to a point of curvature at the rear of the body.

b) Rub rails shall be constructed of 16-gauge longitudinally corrugated or ribbed steel, ventilated, four inches minimum width, and securely fastened to the body by bolts, rivets, or welding.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.