Illinois Administrative Code
Title 92 - TRANSPORTATION
Part 442 - MINIMUM SAFETY STANDARDS FOR CONSTRUCTION OF TYPE II SCHOOL BUSES
Subpart B - CONSTRUCTION OF BODY
Section 442.215 - Ceiling and Side Walls

Current through Register Vol. 48, No. 38, September 20, 2024

a) The ceiling and side walls shall be thermally insulated with a fire-resistant material approved by the Underwriter's Laboratories, Inc., which shall also adequately reduce the noise level and vibrations.

b) The interior of the bus shall be free of all unnecessary projections likely to cause injury. Additional projections (e.g., external speakers, air conditioners) located within 59 inches from the floor shall be padded to prevent injury. This includes inner lining of ceiling and walls. Installation of book racks is not permissible. Interior paneling is required on the ceiling and walls. Paneling shall be of steel or other suitable material of equivalent strength and durability, applied in such a manner as to present a clean, smooth and safe interior. Exposed edges of lapped joints shall be beaded, flanged or otherwise treated and connected to reduce the likelihood of injury from exposed edges.

c) Interior height shall be a minimum of 60 inches, measured from the floor to ceiling at any point on the longitudinal center line from the front vertical bow to the rear vertical bow.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.