Illinois Administrative Code
Title 92 - TRANSPORTATION
Part 442 - MINIMUM SAFETY STANDARDS FOR CONSTRUCTION OF TYPE II SCHOOL BUSES
Subpart B - CONSTRUCTION OF BODY
Section 442.213 - Bumper, Rear

Current through Register Vol. 48, No. 12, March 22, 2024

a) The entire rear bumper must be of metal construction unless an energy absorbing bumper is used.

b) The rear bumper must meet chassis or body manufacturer's standards.

c) The rear bumper shall be shielded between the body and the bumper to prevent hitching or "riding on."

AGENCY NOTE: See Section 442.420 for front bumper requirements.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.