Illinois Administrative Code
Title 92 - TRANSPORTATION
Part 1546 - EMPLOYEE WALKWAYS IN RAILROAD YARDS
Section 1546.20 - General Requirements

Universal Citation: 92 IL Admin Code ยง 1546.20

Current through Register Vol. 48, No. 38, September 20, 2024

a) Walkways may be surfaced with asphalt, concrete, planking, grating,

native material, crushed material, or other similar material. When crushed material is used, 100% of the material must be capable of passing through a 11/2" square sieve opening and 90-100% of the material must be capable of passing through a 1" square sieve opening, provided, however, a de minimus variation shall not be a violation of this Part in an instance where the rail carrier has made a good faith effort to comply with the percentage requirements. Smaller crushed material is preferable. It should be used where drainage and durability issues do not arise. Material that is 3/4" or less in size is recommended for switching lead tracks.

b) Walkways must have a reasonably uniform surface and must be maintained in a safe condition without compromising track drainage.

c) Cross slopes for walkways shall not exceed 1" of elevation for each 8" of horizontal length in any direction.

d) Walkways shall be a minimum width of 2 feet.

e) Walkways within the scope of this Part shall be kept reasonably free of

spilled fuel oil, sand, posts, rocks, and other hazards or obstructions.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.