Illinois Administrative Code
Title 62 - MINING
Part 245 - HYDRAULIC FRACTURING REGULATORY ACT
Subpart A - GENERAL PROVISIONS
Section 245.100 - Applicability

Current through Register Vol. 48, No. 12, March 22, 2024

a) High Volume Horizontal Hydraulic Fracturing Operations This Part applies to all horizontal wells in which any single stage of a stimulation treatment using more than 80,000 gallons, or in which the total amount of all stages of stimulation treatment using more than 300,000 gallons, in the pressurized application of hydraulic fracturing fluid to initiate or propagate fractures in a geologic formation to enhance extraction or production of oil or gas are planned, have occurredor are occurring in this State (Section 1-20 of the Act).

b) Medium Volume Horizontal Hydraulic Fracturing Operations Subpart L applies to all horizontal wells in which the total amount of all stages of stimulation treatment using more than 80,000 gallons but less than 300,001 gallons in the pressurized application of hydraulic fracturing fluid to initiate or propagate fractures in a geologic formation to enhance extraction or production of oil or gas are planned, have occurred or are occurring in this State (Section 1-98 of the Act).

c) The provisions of this Part shall be in addition to the provisions of the Illinois Oil and Gas Act [225 ILCS 725 ] and the rules adopted under that Act (62 Ill. Adm. Code 240). However, if there is a conflict between the provisions of the Illinois Oil and Gas Act and the rules enacted pursuant thereto, the provisions of the Act and this Part shall prevail. (Section 1-20 of the Act)

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.