Illinois Administrative Code
Title 62 - MINING
Part 1816 - PERMANENT PROGRAM PERFORMANCE STANDARDS - SURFACE MINING ACTIVITIES
Section 1816.107 - Backfilling and Grading: Steep slopes

Universal Citation: 62 IL Admin Code ยง 1816.107

Current through Register Vol. 48, No. 12, March 22, 2024

a) Surface mining activities on steep slopes shall be conducted so as to meet the requirements of Sections 1816.102 through 1816.106, and the requirements of this Section except where mining is conducted on flat or gently rolling terrain with an occasional steep slope through which the mining proceeds and leaves a plain or predominantly flat area or where operations are conducted in accordance with 62 Ill. Adm. Code 1824.

b) The following materials shall not be placed on the downslope.

1) Spoil.

2) Waste materials of any type.

3) Debris, including that from clearing and grubbing.

4) Abandoned or disabled equipment.

c) Land above the highwall shall not be disturbed unless the Department finds that this disturbance will facilitate compliance with the environmental protection standards of 62 Ill. Adm. Code 1810 through 1828 and the disturbance is limited to that necessary to facilitate compliance.

d) Woody materials shall not be buried in the backfilled area unless the Department determines that the proposed method for placing woody material within the backfill will not deteriorate the stable condition of the backfilled area.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.