Illinois Administrative Code
Title 56 - LABOR AND EMPLOYMENT
Part 6000 - AMUSEMENT RIDE AND ATTRACTION SAFETY ACT
Section 6000.260 - Chain
Universal Citation: 56 IL Admin Code ยง 6000.260
Current through Register Vol. 48, No. 12, March 22, 2024
a) Twisted wire or stamped chain is not permitted.
b) Chains with manufacturers certified load carrying capacities must be utilized for safety devices and stress bearing applications.
c) Any of the following shall be cause for chain replacement:
1) A 10% reduction in
material diameter at the worn portion of the link;
2) A twisted or disfigured link;
3) Physical deterioration of a link by
strain, usage, rust or corrosion;
4) Used for a purpose other than that for
which the manufacturer recommended; or
5) Used to carry a load in excess of the
manufacturer's working load limit.
d) Cold Shuts, "S" hooks, repair and lap links, and other hardware grade attachments must be welded shut if used to support passengers.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
