Illinois Administrative Code
Title 41 - FIRE PROTECTION
Part 175 - TECHNICAL REQUIREMENTS FOR UNDERGROUND STORAGE TANKS AND THE STORAGE, TRANSPORTATION, SALE AND USE OF PETROLEUM AND OTHER REGULATED SUBSTANCES
Subpart H - REMOVAL, ABANDONMENT AND CHANGE-IN-SERVICE
Section 175.810 - Out of Service
Current through Register Vol. 48, No. 38, September 20, 2024
a) USTs may be put into an out of service status provided they meet the performance standards for new UST systems or the upgrading requirements specified in 41 Ill. Adm. Code 174, 175 and 176 and 40 CFR 280, except that spill and overfill prevention equipment requirements do not have to be met. The USTs may continue in an out of service status for a period of 5 years from the date of last use provided they meet the following requirements:
b) Failure to maintain impressed current system corrosion protection on any tank or piping systems at any point during the remaining 4-year out of service period referenced in subsection (d) shall require the removal of the USTs. When testing of anodes has been delayed past the regular 3-year testing interval, any anode system that fails testing shall require removal of the affected tanks or piping.
c) Failure to empty tanks in an out of service status shall require the owner to remove all contents to less than an inch before proceeding with bringing the tanks back into service.
d) Systems that have been out of use for over one year but less than 5 years may be put back in service provided that the facility meets all the applicable requirements in Parts 172, 174, 175, 176 and 177 and the following additional requirements are met:
e) Single-wall USTs over 30 years old that have been in an out of service status more than one year shall be removed rather than placed back into service.
f) If a UST is not placed back into service within 5 years from the date of last use, the tank system shall be removed within 60 days after the conclusion of the 5-year period.
g) USTs with double-walled tanks and piping shall not be subject to the 5-year limit during the period that is 30 years after the date of installation or while the tank manufacturer's warranty is in place, whichever is less, if all of the following requirements are met:
h) For purposes of this Section, "back in service" means that all regulatory requirements for a return to service have been met, and that the facility has begun regular dispensing operations typical for the location and is compliant with all leak detection, corrosion protection, and operator training requirements.