Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 848 - MANAGEMENT OF USED AND WASTE TIRES
Subpart B - MANAGEMENT STANDARDS
Section 848.204 - Storage of Used and Waste Tires Within Buildings
Universal Citation: 35 IL Admin Code ยง 848.204
Current through Register Vol. 48, No. 38, September 20, 2024
a) Owners and operators of any tire storage site or any tire disposal site who store used or waste tires within buildings must meet the requirements of this Section.
b) No used or waste tires shall be stored within a building unless:
1) the tires are
drained of all water prior to placement in the building;
2) all of the building's windows and doors
are in working order and are secured to prevent unauthorized access;
3) the building is fully enclosed and has a
roof and sides that are impermeable to precipitation; and
4) the building is not a single family home
or other residential building.
c) In addition to the requirements set forth in subsection (b), if more than 60 tons of used or waste tires are located at any one time at the site, the owners and operators of the site must:
1) develop, in consultation with the local
fire department, a tire storage plan for all used or waste tires that are
stored within any building at the site that:
A) takes into consideration the type of
building to be used for tire storage (e.g., warehouse or former grain elevator)
and the type of used or waste tires being stored (e.g., whole or
shredded);
B) identifies, at a
minimum, the tire storage arrangement; aisle spacing; clearance distances
between storage piles and the building walls and ceiling, unit heaters,
furnaces, ducts, and sprinkler deflectors; and points of access for
firefighting personnel and equipment; and
C) is maintained on site, adhered to at all
times, made available for inspection and photocopying by the Agency during
normal business hours. The plan must include the following certification signed
by the owner or operator: "I certify that this tire storage plan has been
developed in consultation with the local fire department and that a copy of
this tire storage plan has been filed with the local fire
department.";
2) meet
the contingency planning and emergency response requirements of Section
848.203;
3) meet the recordkeeping and reporting
requirements of Subpart C; and
4)
comply with the NFPA 51B standard for fire prevention during welding, cutting,
and other hot work.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.