Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 817 - REQUIREMENTS FOR NEW STEEL AND FOUNDRY INDUSTRY WASTES LANDFILLS
Subpart D - NEW STEEL AND FOUNDRY INDUSTRY LOW RISK WASTE LANDFILLS
Section 817.404 - Foundation and Mass Stability Analysis

Current through Register Vol. 48, No. 38, September 20, 2024

a) The material beneath the unit shall have sufficient strength to support the weight of the unit during all phases of construction and operation. The loads and loading rate shall not cause or contribute to the failure of the liner.

b) The total settlement or swell of the foundation shall not cause or contribute to the failure of the liner.

c) The solid waste disposal unit shall be designed to achieve a safety factor against bearing capacity failure of at least 2.0 under static conditions and 1.5 under seismic loadings.

d) The waste disposal unit shall be designed to achieve a factor of safety against slope failure of at least 1.5 for static conditions and 1.3 under seismic loading.

e) In calculating factors of safety, both long term (in tens or hundreds of years) and short term (over the design period of the facility) conditions expected at the facility shall be considered.

f) The potential for earthquake or blast induced liquefaction, and its effect on the stability and integrity of the unit, shall be considered and taken into account in the design. The potential for landslides or earthquake induced liquefaction outside the unit shall be considered if such events could affect the unit.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.