Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 817 - REQUIREMENTS FOR NEW STEEL AND FOUNDRY INDUSTRY WASTES LANDFILLS
Subpart A - GENERAL REQUIREMENTS
Section 817.105 - Waste Classification

Current through Register Vol. 48, No. 38, September 20, 2024

a) Wastes regulated by this Part shall be classified on the basis of leaching potential as determined by the procedure at Section 817.103.

b) Wastes regulated by this Subpart shall fall into one of four classifications:

1) Beneficially usable waste;

2) Potentially usable waste;

3) Low risk waste; or

4) Chemical waste.

c) Maximum allowable leaching concentration (MALC) for the beneficially usable, potentially usable and low risk classes are presented in the table at Section 817.106. Wastes exceeding the MALCs for the low risk class shall be regulated as chemical wastes under 35 Ill. Adm. Code 811.Subpart C.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.