Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 817 - REQUIREMENTS FOR NEW STEEL AND FOUNDRY INDUSTRY WASTES LANDFILLS
Subpart A - GENERAL REQUIREMENTS
Section 817.103 - Determination of Waste Status
Universal Citation: 35 IL Admin Code ยง 817.103
Current through Register Vol. 48, No. 38, September 20, 2024
a) A representative sample of leachate extracted by ASTM Method D3987-85, incorporated by reference in 35 Ill. Adm. Code 810.204, from each waste stream to be disposed of or utilized shall be used to characterize the expected constituents and concentrations of the leachate. Representative samples of waste streams to be tested shall be obtained by use of ASTM Method D2234-76, incorporated by reference in 35 Ill. Adm. Code 810.204.
b) Actual samples of leachate from an existing solid waste disposal unit or beneficial use site may be utilized under the following conditions:
1) The waste in the
existing unit is similar to the waste to be used or disposed;
2) The conditions under which the leachate
was formed are similar to those expected to be encountered; and
3) Leachate is sampled so as to be
representative of undiluted and unattenuated leachate emanating from the
unit.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
