Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 742 - TIERED APPROACH TO CORRECTIVE ACTION OBJECTIVES
Subpart G - TIER 2 SOIL AND SOIL GAS EVALUATION
Section 742.705 - Parameters for Soil Remediation Objective Equations
Current through Register Vol. 48, No. 38, September 20, 2024
a) Appendix C, Tables B, D, and M list the input parameters for the SSL, RBCA, and J&E equations, respectively. The first column lists each symbol as it is presented in the equation. The next column defines the parameters. The third column shows the units for the parameters. The fourth column identifies where information on the parameters can be obtained (i.e., field measurement, applicable equations, reference source, or default value). The last column identifies how the parameters can be generated.
b) Default Values
Default values are numerical values specified for use in the Tier 2 equations. The fourth column of Appendix C, Tables B, D, and M denotes if the default values are from the SSL model, RBCA model, modified J&E model or some other source. The last column of Appendix C, Tables B, D, and M lists the numerical values for the default values used in the SSL, RBCA, and J&E equations, respectively.
c) Site-specific Information
Site-specific information is a parameter measured, obtained, or determined from the site to calculate Tier 2 remediation objectives. The fourth column of Appendix C, Tables B, D, and M identifies those site-specific parameters that may require direct field measurement. For some parameters, numerical default inputs have been provided in the last column of Appendix C, Tables B, D, and M to substitute for site-specific information. In some cases, information on the receptor or soil type is required to select the applicable numerical default inputs. Site-specific information includes:
d) Toxicological-specific Information
e) Chemical-specific Information
Chemical-specific information used to calculate Tier 2 remediation objectives is listed in Appendix C, Table E.
f) Calculations
Calculating numerical values for some parameters requires the use of equations listed in Appendix C, Tables A, C, and L. The parameters that are calculated are listed in Appendix C, Tables B, D, and M.