Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 728 - LAND DISPOSAL RESTRICTIONS
Subpart E - PROHIBITIONS ON STORAGE
Table T - Treatment Standards for Hazardous Wastes

Current through Register Vol. 48, No. 38, September 20, 2024

Note: The treatment standards that formerly appeared in tables in Sections 728.141, 728.142, and 728.143 have been consolidated into this table.

USEPA Hazardous Waste Number

Waste Description and Treatment or Regulatory Subcategory1

D0019

Ignitable Characteristic Wastes, except for the 35 Ill. Adm. Code 721.121(a)(1) High TOC Subcategory.

D0019

High TOC Ignitable Characteristic Liquids Subcategory based on 35 Ill. Adm. Code 721.121(a)(1) - Greater than or equal to 10 percent total organic carbon.

(Note: This subcategory consists of nonwastewaters only.)

D0029

Corrosive Characteristic Wastes.

D002, D004, D005, D006, D007, D008, D009, D010, D011

Radioactive high level wastes generated during the reprocessing of fuel rods.

(Note: This subcategory consists of nonwastewaters only.)

D0039

Reactive Sulfides Subcategory based on 35 Ill. Adm. Code 721.123(a)(5).

D0039

Explosive subcategory based on 35 Ill. Adm. Code 721.123(a)(6), (a)(7), and (a)(8).

D0039

Unexploded ordnance and other explosive devices that have been the subject of an emergency response.

D0039

Other Reactives Subcategory based on 35 Ill. Adm. Code 721.123(a)(1).

D0039

Water Reactive Subcategory based on 35 Ill. Adm. Code 721.123(a)(2), (a)(3), and (a)(4).

(Note: This subcategory consists of nonwastewaters only.)

D0039

Reactive Cyanides Subcategory based on 35 Ill. Adm. Code 721.123(a)(5).

D0049

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for arsenic based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0059

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for barium based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0069

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for cadmium based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0069

Cadmium-Containing Batteries Subcategory.

(Note: This subcategory consists of nonwastewaters only.)

D0069

Radioactively contaminated cadmium-containing batteries.

(Note: This subcategory consists of nonwastewaters only.)

D0079

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for chromium based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0089

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for lead based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0089

Lead Acid Batteries Subcategory

(Note: This standard only applies to lead acid batteries that are identified as RCRA hazardous wastes and that are not excluded elsewhere from regulation under the land disposal restrictions of this Part or exempted under other regulations (see 35 Ill. Adm. Code 726.180 ). This subcategory consists of nonwastewaters only.)

D0089

Radioactive Lead Solids Subcategory

(Note: These lead solids include, but are not limited to, all forms of lead shielding and other elemental forms of lead. These lead solids do not include treatment residuals such as hydroxide sludges, other wastewater treatment residuals, or incinerator ashes that can undergo conventional pozzolanic stabilization, nor do they include organo-lead materials that can be incinerated and stabilized as ash. This subcategory consists of nonwastewaters only.)

D0099

Nonwastewaters that exhibit, or are expected to exhibit, the characteristic of toxicity for mercury based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a); and contain greater than or equal to 260 mg/kg total mercury that also contain organics and are not incinerator residues. (High Mercury-Organic Subcategory)

D0099

Nonwastewaters that exhibit, or are expected to exhibit, the characteristic of toxicity for mercury based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a); and contain greater than or equal to 260 mg/kg total mercury that are inorganic, including incinerator residues and residues from RMERC. (High Mercury-Inorganic Subcategory)

D0099

Nonwastewaters that exhibit, or are expected to exhibit, the characteristic of toxicity for mercury based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a); and contain less than 260 mg/kg total mercury. (Low Mercury Subcategory)

D0099

All other nonwastewaters that exhibit, or are expected to exhibit, the characteristic of toxicity for mercury based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a); and contain less than 260 mg/kg total mercury and that are not residues from RMERC. (Low Mercury Subcategory)

D0099

All D009 wastewaters.

D0099

Elemental mercury contaminated with radioactive materials.

(Note: This subcategory consists of nonwastewaters only.)

D0099

Hydraulic oil contaminated with Mercury Radioactive Materials Subcategory.

(Note: This subcategory consists of nonwastewaters only.)

D0099

Radioactively contaminated mercury-containing batteries.

(Note: This subcategory consists of nonwastewaters only.)

D0109

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for selenium based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0119

Wastes that exhibit, or are expected to exhibit, the characteristic of toxicity for silver based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0119

Radioactively contaminated silver-containing batteries.

(Note: This subcategory consists of nonwastewaters only.)

D0129

Wastes that are TC for endrin based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0139

Wastes that are TC for lindane based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0149

Wastes that are TC for methoxychlor based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0159

Wastes that are TC for toxaphene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0169

Wastes that are TC for 2,4-D (2,4-dichlorophenoxyacetic acid) based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0179

Wastes that are TC for 2,4,5-TP (Silvex) based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0189

Wastes that are TC for benzene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0199

Wastes that are TC for carbon tetrachloride based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0209

Wastes that are TC for chlordane based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0219

Wastes that are TC for chlorobenzene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0229

Wastes that are TC for chloroform based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0239

Wastes that are TC for o-cresol based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0249

Wastes that are TC for m-cresol based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0259

Wastes that are TC for p-cresol based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0269

Wastes that are TC for cresols (total) based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0279

Wastes that are TC for p-dichlorobenzene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0289

Wastes that are TC for 1,2-dichloroethane based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0299

Wastes that are TC for 1,1-dichloroethylene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0309

Wastes that are TC for 2,4-dinitrotoluene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0319

Wastes that are TC for heptachlor based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0329

Wastes that are TC for hexachlorobenzene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0339

Wastes that are TC for hexachlorobutadiene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0349

Wastes that are TC for hexachloroethane based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0359

Wastes that are TC for methyl ethyl ketone based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0369

Wastes that are TC for nitrobenzene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0379

Wastes that are TC for pentachlorophenol based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0389

Wastes that are TC for pyridine based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0399

Wastes that are TC for tetrachloroethylene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0409

Wastes that are TC for trichloroethylene based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0419

Wastes that are TC for 2,4,5-trichlorophenol based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0429

Wastes that are TC for 2,4,6-trichlorophenol based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

D0439

Wastes that are TC for vinyl chloride based on Method 1311 (Toxicity Characteristic Leaching Procedure (TCLP)) in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a).

F001, F002, F003, F004 & F005

F001, F002, F003, F004, or F005 solvent wastes that contain any combination of one or more of the following spent solvents: acetone, benzene, n-butyl alcohol, carbon disulfide, carbon tetrachloride, chlorinated fluorocarbons, chlorobenzene, o-cresol, m-cresol, p-cresol, cyclohexanone, o-dichlorobenzene, 2-ethoxyethanol, ethyl acetate, ethyl benzene, ethyl ether, isobutyl alcohol, methanol, methylene chloride, methyl ethyl ketone, methyl isobutyl ketone, nitrobenzene, 2-nitropropane, pyridine, tetrachloroethylene, toluene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, 1,1,2-trichloro-1,2,2-trifluoroethane, trichloroethylene, trichloromonofluoromethane, or xylenes (except as specifically noted in other subcategories). See further details of these listings in 35 Ill. Adm. Code 721.131.

F001, F002, F003, F004 & F005

F003 and F005 solvent wastes that contain any combination of one or more of the following three solvents as the only listed F001 through F005 solvents: carbon disulfide, cyclohexanone, or methanol. (Formerly Section 728.141(c) ).

F001, F002, F003, F004 & F005

F005 solvent waste containing 2-Nitropropane as the only listed F001 through F005 solvent.

F001, F002, F003, F004 & F005

F005 solvent waste containing 2-Ethoxyethanol as the only listed F001 through F005 solvent.

F006

Wastewater treatment sludges from electroplating operations except from the following processes: (1) Sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning or stripping associated with tin, zinc, and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum.

F007

Spent cyanide plating bath solutions from electroplating operations.

F008

Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are used in the process.

F009

Spent stripping and cleaning bath solutions from electroplating operations where cyanides are used in the process.

F010

Quenching bath residues from oil baths from metal heat-treating operations where cyanides are used in the process.

F011

Spent cyanide solutions from salt bath pot cleaning from metal heat-treating operations.

F012

Quenching wastewater treatment sludges from metal heat-treating operations where cyanides are used in the process.

F019

Wastewater treatment sludges from the chemical conversion coating of aluminum, except from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process.

F020, F021, F022, F023, F026

Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of: (1) tri- or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives, excluding wastes from the production of Hexachlorophene from highly purified 2,4,5-trichlorophenol (i.e., F020); (2) pentachlorophenol, or of intermediates used to produce its derivatives (i.e., F021); (3) tetra-, penta-, or hexachlorobenzenes under alkaline conditions (i.e., F022) and wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production of materials on equipment previously used for the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of: (1) tri- or tetrachlorophenols, excluding wastes from equipment used only for the production of Hexachlorophene from highly purified 2,4,5-trichlorophenol (F023) or (2) tetra-, penta-, or hexachlorobenzenes under alkaline conditions (i.e., F026).

F024

Process wastes, including but not limited to, distillation residues, heavy ends, tars, and reactor clean-out wastes, from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. (This listing does not include wastewaters, wastewater treatment sludges, spent catalysts, and wastes listed in 35 Ill. Adm. Code 721.131 or 721.132.)

F025

Condensed light ends from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one up to and including five, with varying amounts and positions of chlorine substitution. F025 - Light Ends Subcategory.

F025

Spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. F025 - Spent Filters/Aids and Desiccants Subcategory.

F027

Discarded unused formulations containing tri-, tetra-, or pentachlorophenol or discarded unused formulations containing compounds derived from these chlorophenols. (This listing does not include formulations containing hexachlorophene synthesized from prepurified 2,4,5-trichlorophenol as the sole component.)

F028

Residues resulting from the incineration or thermal treatment of soil contaminated with USEPA hazardous waste numbers F020, F021, F023, F026, and F027.

F032

Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations (except potentially cross-contaminated wastes that have had the F032 USEPA hazardous waste number deleted in accordance with 35 Ill. Adm. Code 721.135 or potentially cross-contaminated wastes that are otherwise currently regulated as hazardous wastes (i.e., F034 or F035), where the generator does not resume or initiate use of chlorophenolic formulations). This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote or penta-chlorophenol.

F034

Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use creosote formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote or pentachlorophenol.

F035

Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes that are generated at plants that use inorganic preservatives containing arsenic or chromium. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote or pentachlorophenol.

F037

Petroleum refinery primary oil/water/solids separation sludge - any sludge generated from the gravitational separation of oil/water/solids during the storage or treatment of process wastewaters and oily cooling wastewaters from petroleum refineries. Such sludges include, but are not limited to, those generated in: oil/water/solids separators; tanks, and impoundments; ditches, and other conveyances; sumps; and stormwater units receiving dry weather flow. Sludge generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges generated in aggressive biological treatment units as defined in 35 Ill. Adm. Code 721.131(b)(2) (including sludges generated in one or more additional units after wastewaters have been treated in aggressive biological treatment units) and K051 wastes are not included in this listing.

F038

Petroleum refinery secondary (emulsified) oil/water/solids separation sludge or float generated from the physical or chemical separation of oil/water/solids in process wastewaters and oily cooling wastewaters from petroleum refineries. Such wastes include, but are not limited to, all sludges and floats generated in: induced air floatation (IAF) units, tanks, and impoundments, and all sludges generated in DAF units. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges, and floats generated in aggressive biological treatment units as defined in 35 Ill. Adm. Code 721.131(b)(2) (including sludges and floats generated in one or more additional units after wastewaters have been treated in aggressive biological units) and F037, K048, and K051 are not included in this listing.

F039

Leachate (liquids that have percolated through land disposed wastes) resulting from the disposal of more than one restricted waste classified as hazardous under Subpart D. (Leachate resulting from the disposal of one or more of the following USEPA hazardous wastes and no other hazardous wastes retains its USEPA hazardous waste numbers: F020, F021, F022, F026, F027, or F028.).

K001

Bottom sediment sludge from the treatment of wastewaters from wood preserving processes that use creosote or pentachlorophenol.

K002

Wastewater treatment sludge from the production of chrome yellow and orange pigments.

K003

Wastewater treatment sludge from the production of molybdate orange pigments.

K004

Wastewater treatment sludge from the production of zinc yellow pigments.

K005

Wastewater treatment sludge from the production of chrome green pigments.

K006

Wastewater treatment sludge from the production of chrome oxide green pigments (anhydrous).

K006

Wastewater treatment sludge from the production of chrome oxide green pigments (hydrated).

K007

Wastewater treatment sludge from the production of iron blue pigments.

K008

Oven residue from the production of chrome oxide green pigments.

K009

Distillation bottoms from the production of acetaldehyde from ethylene.

K010

Distillation side cuts from the production of acetaldehyde from ethylene.

K011

Bottom stream from the wastewater stripper in the production of acrylonitrile.

K013

Bottom stream from the acetonitrile column in the production of acrylonitrile.

K014

Bottoms from the acetonitrile purification column in the production of acrylonitrile.

K015

Still bottoms from the distillation of benzyl chloride.

K016

Heavy ends or distillation residues from the production of carbon tetrachloride.

K017

Heavy ends (still bottoms) from the purification column in the production of epichlorohydrin.

K018

Heavy ends from the fractionation column in ethyl chloride production.

K019

Heavy ends from the distillation of ethylene dichloride in ethylene dichloride production.

K020

Heavy ends from the distillation of vinyl chloride in vinyl chloride monomer production.

K021

Aqueous spent antimony catalyst waste from fluoromethanes production.

K022

Distillation bottom tars from the production of phenol or acetone from cumene.

K023

Distillation light ends from the production of phthalic anhydride from naphthalene.

K024

Distillation bottoms from the production of phthalic anhydride from naphthalene.

K025

Distillation bottoms from the production of nitrobenzene by the nitration of benzene.

K026

Stripping still tails from the production of methyl ethyl pyridines.

K027

Centrifuge and distillation residues from toluene diisocyanate production.

K028

Spent catalyst from the hydrochlorinator reactor in the production of 1,1,1-trichloroethane.

K029

Waste from the product steam stripper in the production of 1,1,1-trichloroethane.

K030

Column bodies or heavy ends from the combined production of trichloroethylene and perchloroethylene.

K031

By-product salts generated in the production of MSMA and cacodylic acid.

K032

Wastewater treatment sludge from the production of chlordane.

K033

Wastewater and scrub water from the chlorination of cyclopentadiene in the production of chlordane.

K034

Filter solids from the filtration of hexachlorocyclopentadiene in the production of chlordane.

K035

Wastewater treatment sludges generated in the production of creosote.

K036

Still bottoms from toluene reclamation distillation in the production of disulfoton.

K037

Wastewater treatment sludges from the production of disulfoton.

K038

Wastewater from the washing and stripping of phorate production.

K039

Filter cake from the filtration of diethylphosphorodithioic acid in the production of phorate.

K040

Wastewater treatment sludge from the production of phorate.

K041

Wastewater treatment sludge from the production of toxaphene.

K042

Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the production of 2,4,5-T.

K043

2,6-Dichlorophenol waste from the production of 2,4-D.

K044

Wastewater treatment sludges from the manufacturing and processing of explosives.

K045

Spent carbon from the treatment of wastewater containing explosives.

K046

Wastewater treatment sludges from the manufacturing, formulation and loading of lead-based initiating compounds.

K047

Pink or red water from TNT operations.

K048

Dissolved air flotation (DAF) float from the petroleum refining industry.

K049

Slop oil emulsion solids from the petroleum refining industry.

K050

Heat exchanger bundle cleaning sludge from the petroleum refining industry.

K051

API separator sludge from the petroleum refining industry.

K052

Tank bottoms (leaded) from the petroleum refining industry.

K060

Ammonia still lime sludge from coking operations.

K061

Emission control dust or sludge from the primary production of steel in electric furnaces.

K062

Spent pickle liquor generated by steel finishing operations of facilities within the iron and steel industry (SIC Codes 331 and 332).

K069

Emission control dust or sludge from secondary lead smelting-Calcium sulfate (Low Lead) Subcategory.

K069

Emission control dust or sludge from secondary lead smelting-Non-Calcium sulfate (High Lead) Subcategory.

K071

K071 (Brine purification muds from the mercury cell process in chlorine production, where separately prepurified brine is not used) nonwastewaters that are residues from RMERC.

K071

K071 (Brine purification muds from the mercury cell process in chlorine production, where separately prepurified brine is not used) nonwastewaters that are not residues from RMERC.

K071

All K071 wastewaters.

K073

Chlorinated hydrocarbon waste from the purification step of the diaphragm cell process using graphite anodes in chlorine production.

K083

Distillation bottoms from aniline production.

K084

Wastewater treatment sludges generated during the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.

K085

Distillation or fractionation column bottoms from the production of chlorobenzenes.

K086

Solvent wastes and sludges, caustic washes and sludges, or water washes and sludges from cleaning tubs and equipment used in the formulation of ink from pigments, driers, soaps, and stabilizers containing chromium and lead.

K087

Decanter tank tar sludge from coking operations.

K088

Spent potliners from primary aluminum reduction.

K093

Distillation light ends from the production of phthalic anhydride from ortho-xylene.

K094

Distillation bottoms from the production of phthalic anhydride from ortho-xylene.

K095

Distillation bottoms from the production of 1,1,1-trichloroethane.

K096

Heavy ends from the heavy ends column from the production of 1,1,1-trichloroethane.

K097

Vacuum stripper discharge from the chlordane chlorinator in the production of chlordane.

K098

Untreated process wastewater from the production of toxaphene.

K099

Untreated wastewater from the production of 2,4-D.

K100

Waste leaching solution from acid leaching of emission control dust or sludge from secondary lead smelting.

K101

Distillation tar residues from the distillation of aniline-based compounds in the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.

K102

Residue from the use of activated carbon for decolorization in the production of veterinary pharmaceuticals from arsenic or organo-arsenic compounds.

K103

Process residues from aniline extraction from the production of aniline.

K104

Combined wastewater streams generated from nitrobenzene or aniline production.

K105

Separated aqueous stream from the reactor product washing step in the production of chlorobenzenes.

K106

K106 (wastewater treatment sludge from the mercury cell process in chlorine production) nonwastewaters that contain greater than or equal to 260 mg/kg total mercury.

K106

K106 (wastewater treatment sludge from the mercury cell process in chlorine production) nonwastewaters that contain less than 260 mg/kg total mercury that are residues from RMERC.

K106

Other K106 nonwastewaters that contain less than 260 mg/kg total mercury and are not residues from RMERC.

K106

All K106 wastewaters.

K107

Column bottoms from product separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.

K108

Condensed column overheads from product separation and condensed reactor vent gases from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.

K109

Spent filter cartridges from product purification from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.

K110

Condensed column overheads from intermediate separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.

K111

Product washwaters from the production of dinitrotoluene via nitration of toluene.

K112

Reaction by-product water from the drying column in the production of toluenediamine via hydrogenation of dinitrotoluene.

K113

Condensed liquid light ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.

K114

Vicinals from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.

K115

Heavy ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.

K116

Organic condensate from the solvent recovery column in the production of toluene diisocyanate via phosgenation of toluenediamine.

K117

Wastewater from the reactor vent gas scrubber in the production of ethylene dibromide via bromination of ethene.

K118

Spent absorbent solids from purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene.

K123

Process wastewater (including supernates, filtrates, and washwaters) from the production of ethylenebisdithiocarbamic acid and its salts.

K124

Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid and its salts.

K125

Filtration, evaporation, and centrifugation solids from the production of ethylenebisdithiocarbamic acid and its salts.

K126

Baghouse dust and floor sweepings in milling and packaging operations from the production or formulation of ethylenebisdithiocarbamic acid and its salts.

K131

Wastewater from the reactor and spent sulfuric acid from the acid dryer from the production of methyl bromide.

K132

Spent absorbent and wastewater separator solids from the production of methyl bromide.

K136

Still bottoms from the purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene.

K141

Process residues from the recovery of coal tar, including, but not limited to, collecting sump residues from the production of coke or the recovery of coke by-products produced from coal. This listing does not include K087 (decanter tank tar sludge from coking operations).

K142

Tar storage tank residues from the production of coke from coal or from the recovery of coke by-products produced from coal.

K143

Process residues from the recovery of light oil, including, but not limited to, those generated in stills, decanters, and wash oil recovery units from the recovery of coke by-products produced from coal.

K144

Wastewater sump residues from light oil refining, including, but not limited to, intercepting or contamination sump sludges from the recovery of coke by-products produced from coal.

K145

Residues from naphthalene collection and recovery operations from the recovery of coke by-products produced from coal.

K147

Tar storage tank residues from coal tar refining.

K148

Residues from coal tar distillation, including, but not limited to, still bottoms.

K149

Distillation bottoms from the production of a- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups. (This waste does not include still bottoms from the distillations of benzyl chloride.)

K150

Organic residuals, excluding spent carbon adsorbent, from the spent chlorine gas and hydrochloric acid recovery processes associated with the production of a- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups.

K151

Wastewater treatment sludges, excluding neutralization and biological sludges, generated during the treatment of wastewaters from the production of a- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups.

K156

Organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes.

K157

Wastewaters (including scrubber waters, condenser waters, washwaters, and separation waters) from the production of carbamates and carbamoyl oximes.

K158

Baghouse dusts and filter/separation solids from the production of carbamates and carbamoyl oximes.

K159

Organics from the treatment of thiocarbamate wastes.10

K161

Purification solids (including filtration, evaporation, and centrifugation solids), baghouse dust, and floor sweepings from the production of dithiocarbamate acids and their salts.

K169

Crude oil tank sediment from petroleum refining operations.

K170

Clarified slurry oil sediment from petroleum refining operations.

K171

Spent hydrotreating catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors. (This listing does not include inert support media.)

K172

Spent hydrorefining catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors. (This listing does not include inert support media.)

K174

Wastewater treatment sludge from the production of ethylene dicholoride or vinyl choloride monomer.

K175

Wastewater treatment sludge from the production of vinyl choloride monomer using mercuric chloride catalyst in an acetylene-based process.

K175

All K175 wastewaters.

K176

Baghouse filters from the production of antimony oxide, including filters from the production of intermediates e.g., antimony metal or crude antimony oxide).

K177

Slag from the production of antimony oxide that is speculatively accumulated or disposed, including slag from the production of intermediates (e.g., antimony metal or crude antimony oxide).

K178

Residues from manufacturing and manufacturing-site storage of ferric chloride from acids formed during the production of titanium dioxide using the chloride-ilmenite process.

K181

Nonwastewaters from the production of dyes or pigments (including nonwastewaters commingled at the point of generation with nonwastewaters from other processes) that, at the point of generation, contain mass loadings of any of the constituents identified in Section 721.132(c) which are equal to or greater than the corresponding Section 721.132(c) levels, as determined on a calendar-year basis.

P001

Warfarin, & salts, when present at concentrations greater than 0.3 percent.

P002

1-Acetyl-2-thiourea.

P003

Acrolein.

P004

Aldrin.

P005

Allyl alcohol.

P006

Aluminum phosphide.

P007

5-Aminomethyl-3-isoxazolol.

P008

4-Aminopyridine.

P009

Ammonium picrate.

P010

Arsenic acid.

P011

Arsenic pentoxide.

P012

Arsenic trioxide.

P013

Barium cyanide.

P014

Thiophenol (Benzene thiol).

P015

Beryllium dust.

P016

Dichloromethyl ether (Bis(chloromethyl)ether).

P017

Bromoacetone.

P018

Brucine.

P020

2-sec-Butyl-4,6-dinitrophenol (Dinoseb).

P021

Calcium cyanide.

P022

Carbon disulfide.

P023

Chloroacetaldehyde.

P024

p-Chloroaniline.

P026

1-(o-Chlorophenyl)thiourea.

P027

3-Chloropropionitrile.

P028

Benzyl chloride.

P029

Copper cyanide.

P030

Cyanides (soluble salts and complexes).

P031

Cyanogen.

P033

Cyanogen chloride.

P034

2-Cyclohexyl-4,6-dinitrophenol.

P036

Dichlorophenylarsine.

P037

Dieldrin.

P038

Diethylarsine.

P039

Disulfoton.

P040

O,O-Diethyl-O-pyrazinyl-phosphorothioate.

P041

Diethyl-p-nitrophenyl phosphate.

P042

Epinephrine.

P043

Diisopropylfluorophosphate (DFP).

P044

Dimethoate.

P045

Thiofanox.

P046

a,a-Dimethylphenethylamine.

P047

4,6-Dinitro-o-cresol.

P047

4,6-Dinitro-o-cresol salts.

P048

2,4-Dinitrophenol.

P049

Dithiobiuret.

P050

Endosulfan.

P051

Endrin.

P054

Aziridine.

P056

Fluorine.

P057

Fluoroacetamide.

P058

Fluoroacetic acid, sodium salt.

P059

Heptachlor.

P060

Isodrin.

P062

Hexaethyl tetraphosphate.

P063

Hydrogen cyanide.

P064

Isocyanic acid, ethyl ester.

P065

P065 (mercury fulminate) nonwastewaters, regardless of their total mercury content, that are not incinerator residues or are not residues from RMERC.

P065

P065 (mercury fulminate) nonwastewaters that are either incinerator residues or are residues from RMERC; and contain greater than or equal to 260 mg/kg total mercury.

P065

P065 (mercury fulminate) nonwastewaters that are residues from RMERC and contain less than 260 mg/kg total mercury.

P065

P065 (mercury fulminate) nonwastewaters that are incinerator residues and contain less than 260 mg/kg total mercury.

P065

All P065 (mercury fulminate) wastewaters.

P066

Methomyl.

P067

2-Methyl-aziridine.

P068

Methyl hydrazine.

P069

2-Methyllactonitrile.

P070

Aldicarb.

P071

Methyl parathion.

P072

1-Naphthyl-2-thiourea.

P073

Nickel carbonyl.

P074

Nickel cyanide.

P075

Nicotine and salts.

P076

Nitric oxide.

P077

p-Nitroaniline.

P078

Nitrogen dioxide.

P081

Nitroglycerin.

P082

N-Nitrosodimethylamine.

P084

N-Nitrosomethylvinylamine.

P085

Octamethylpyrophosphoramide.

P087

Osmium tetroxide.

P088

Endothall.

P089

Parathion.

P092

P092 (phenyl mercuric acetate) nonwastewaters, regardless of their total mercury content, that are not incinerator residues or are not residues from RMERC.

P092

P092 (phenyl mercuric acetate) nonwastewaters that are either incinerator residues or are residues from RMERC; and still contain greater than or equal to 260 mg/kg total mercury.

P092

P092 (phenyl mercuric acetate) nonwastewaters that are residues from RMERC and contain less than 260 mg/kg total mercury.

P092

P092 (phenyl mercuric acetate) nonwastewaters that are incinerator residues and contain less than 260 mg/kg total mercury.

P092

All P092 (phenyl mercuric acetate) wastewaters.

P093

Phenylthiourea.

P094

Phorate.

P095

Phosgene.

P096

Phosphine.

P097

Famphur.

P098

Potassium cyanide.

P099

Potassium silver cyanide.

P101

Ethyl cyanide (Propanenitrile).

P102

Propargyl alcohol.

P103

Selenourea.

P104

Silver cyanide.

P105

Sodium azide.

P106

Sodium cyanide.

P108

Strychnine and salts.

P109

Tetraethyldithiopyrophosphate.

P110

Tetraethyl lead.

P111

Tetraethylpyrophosphate.

P112

Tetranitromethane.

P113

Thallic oxide.

P114

Thallium selenite.

P115

Thallium (I) sulfate.

P116

Thiosemicarbazide.

P118

Trichloromethanethiol.

P119

Ammonium vanadate.

P120

Vanadium pentoxide.

P121

Zinc cyanide.

P122

Zinc phosphide Zn3P2, when present at concentrations greater than 10 percent.

P123

Toxaphene.

P127

Carbofuran.10

P128

Mexacarbate.10

P185

Tirpate.10

P188

Physostigimine salicylate.10

P189

Carbosulfan.10

P190

Metolcarb.10

P191

Dimetilan.10

P192

Isolan.10

P194

Oxamyl.10

P196

Manganese dimethyldithiocarbamates (total).10

P197

Formparanate.10

P198

Formetanate hydrochloride.10

P199

Methiocarb.10

P201

Promecarb.10

P202

m-Cumenyl methylcarbamate.10

P203

Aldicarb sulfone.10

P204

Physostigmine.10

P205

Ziram.10

U001

Acetaldehyde.

U002

Acetone.

U003

Acetonitrile.

U004

Acetophenone.

U005

2-Acetylaminofluorene.

U006

Acetyl chloride.

U007

Acrylamide.

U008

Acrylic acid.

U009

Acrylonitrile.

U010

Mitomycin C.

U011

Amitrole.

U012

Aniline.

U014

Auramine.

U015

Azaserine.

U016

Benz(c)acridine.

U017

Benzal chloride.

U018

Benz(a)anthracene.

U019

Benzene.

U020

Benzenesulfonyl chloride.

U021

Benzidine.

U022

Benzo(a)pyrene.

U023

Benzotrichloride.

U024

bis(2-Chloroethoxy)methane.

U025

bis(2-Chloroethyl)ether.

U026

Chlornaphazine.

U027

bis(2-Chloroisopropyl)ether.

U028

bis(2-Ethylhexyl)phthalate.

U029

Methyl bromide (Bromomethane).

U030

4-Bromophenyl phenyl ether.

U031

n-Butyl alcohol.

U032

Calcium chromate.

U033

Carbon oxyfluoride.

U034

Trichloroacetaldehyde (Chloral).

U035

Chlorambucil.

U036

Chlordane.

U037

Chlorobenzene.

U038

Chlorobenzilate.

U039

p-Chloro-m-cresol.

U041

Epichlorohydrin (1-Chloro-2,3-epoxypropane).

U042

2-Chloroethyl vinyl ether.

U043

Vinyl chloride.

U044

Chloroform.

U045

Chloromethane (Methyl chloride).

U046

Chloromethyl methyl ether.

U047

2-Chloronaphthalene.

U048

2-Chlorophenol.

U049

4-Chloro-o-toluidine hydrochloride.

U050

Chrysene.

U051

Creosote.

U052

Cresols (Cresylic acid).

U053

Crotonaldehyde.

U055

Cumene.

U056

Cyclohexane.

U057

Cyclohexanone.

U058

Cyclophosphamide.

U059

Daunomycin.

U060

DDD.

U061

DDT.

U062

Diallate.

U063

Dibenz(a,h)anthracene.

U064

Dibenz(a,i)pyrene.

U066

1,2-Dibromo-3-chloropropane.

U067

Ethylene dibromide (1,2-Dibromoethane).

U068

Dibromomethane.

U069

Di-n-butyl phthalate.

U070

o-Dichlorobenzene.

U071

m-Dichlorobenzene.

U072

p-Dichlorobenzene.

U073

3,3'-Dichlorobenzidine.

U074

1,4-Dichloro-2-butene.

U075

Dichlorodifluoromethane.

U076

1,1-Dichloroethane.

U077

1,2-Dichloroethane.

U078

1,1-Dichloroethylene.

U079

1,2-Dichloroethylene.

U080

Methylene chloride.

U081

2,4-Dichlorophenol.

U082

2,6-Dichlorophenol.

U083

1,2-Dichloropropane.

U084

1,3-Dichloropropylene.

U085

1,2,3,4-Diepoxybutane

U086

N,N'-Diethylhydrazine.

U087

O,O-Diethyl-S-methyldithiophosphate.

U088

Diethyl phthalate.

U089

Diethyl stilbestrol.

U090

Dihydrosafrole.

U091

3,3'-Dimethoxybenzidine.

U092

Dimethylamine.

U093

p-Dimethylaminoazobenzene.

U094

7,12-Dimethylbenz(a)anthracene.

U095

3,3'-Dimethylbenzidine.

U096

a, a-Dimethyl benzyl hydroperoxide.

U097

Dimethylcarbamoyl chloride.

U098

1,1-Dimethylhydrazine.

U099

1,2-Dimethylhydrazine.

U101

2,4-Dimethylphenol.

U102

Dimethyl phthalate.

U103

Dimethyl sulfate.

U105

2,4-Dinitrotoluene.

U106

2,6-Dinitrotoluene.

U107

Di-n-octyl phthalate.

U108

1,4-Dioxane.

U109

1,2-Diphenylhydrazine.

U110

Dipropylamine.

U111

Di-n-propylnitrosamine.

U112

Ethyl acetate.

U113

Ethyl acrylate.

U114

Ethylenebisdithiocarbamic acid salts and esters.

U115

Ethylene oxide.

U116

Ethylene thiourea.

U117

Ethyl ether.

U118

Ethyl methacrylate.

U119

Ethyl methane sulfonate.

U120

Fluoranthene.

U121

Trichloromonofluoromethane.

U122

Formaldehyde.

U123

Formic acid.

U124

Furan.

U125

Furfural.

U126

Glycidylaldehyde.

U127

Hexachlorobenzene.

U128

Hexachlorobutadiene.

U129

Lindane.

U130

Hexachlorocyclopentadiene.

U131

Hexachloroethane.

U132

Hexachlorophene.

U133

Hydrazine.

U134

Hydrogen fluoride.

U135

Hydrogen sulfide.

U136

Cacodylic acid.

U137

Indeno(1,2,3-cd)pyrene.

U138

Iodomethane.

U140

Isobutyl alcohol.

U141

Isosafrole.

U142

Kepone.

U143

Lasiocarpine.

U144

Lead acetate.

U145

Lead phosphate.

U146

Lead subacetate.

U147

Maleic anhydride.

U148

Maleic hydrazide.

U149

Malononitrile.

U150

Melphalan.

U151

U151 (mercury) nonwastewaters that contain greater than or equal to 260 mg/kg total mercury.

U151

U151 (mercury) nonwastewaters that contain less than 260 mg/kg total mercury and that are residues from RMERC only.

U151

U151 (mercury) nonwastewaters that contain less than 260 mg/kg total mercury and that are not residues from RMERC only.

U151

All U151 (mercury) wastewater.

U151

Elemental Mercury Contaminated with Radioactive Materials.

U152

Methacrylonitrile.

U153

Methanethiol.

U154

Methanol.

U155

Methapyrilene.

U156

Methyl chlorocarbonate.

U157

3-Methylcholanthrene.

U158

4,4'-Methylene bis(2-chloroaniline).

U159

Methyl ethyl ketone.

U160

Methyl ethyl ketone peroxide.

U161

Methyl isobutyl ketone.

U162

Methyl methacrylate.

U163

N-Methyl-N'-nitro-N-nitrosoguanidine.

U164

Methylthiouracil.

U165

Naphthalene.

U166

1,4-Naphthoquinone.

U167

1-Naphthylamine.

U168

2-Naphthylamine.

U169

Nitrobenzene.

U170

p-Nitrophenol.

U171

2-Nitropropane.

U172

N-Nitrosodi-n-butylamine.

U173

N-Nitrosodiethanolamine.

U174

N-Nitrosodiethylamine.

U176

N-Nitroso-N-ethylurea.

U177

N-Nitroso-N-methylurea.

U178

N-Nitroso-N-methylurethane.

U179

N-Nitrosopiperidine.

U180

N-Nitrosopyrrolidine.

U181

5-Nitro-o-toluidine.

U182

Paraldehyde.

U183

Pentachlorobenzene.

U184

Pentachloroethane.

U185

Pentachloronitrobenzene.

U186

1,3-Pentadiene.

U187

Phenacetin.

U188

Phenol.

U189

Phosphorus sulfide.

U190

Phthalic anhydride.

U191

2-Picoline.

U192

Pronamide.

U193

1,3-Propane sultone.

U194

n-Propylamine.

U196

Pyridine.

U197

p-Benzoquinone.

U200

Reserpine.

U201

Resorcinol.

U203

Safrole.

U204

Selenium dioxide.

U205

Selenium sulfide.

U206

Streptozotocin.

U207

1,2,4,5-Tetrachlorobenzene.

U208

1,1,1,2-

Tetrachloroethane.

U209

1,1,2,2-Tetrachloroethane.

U210

Tetrachloroethylene.

U211

Carbon tetrachloride.

U213

Tetrahydrofuran.

U214

Thallium (I) acetate.

U215

Thallium (I) carbonate.

U216

Thallium (I) chloride.

U217

Thallium (I) nitrate.

U218

Thioacetamide.

U219

Thiourea.

U220

Toluene.

U221

Toluenediamine.

U222

o-Toluidine hydrochloride.

U223

Toluene diisocyanate.

U225

Bromoform (Tribromomethane).

U226

1,1,1-Trichloroethane.

U227

1,1,2-Trichloroethane.

U228

Trichloroethylene.

U234

1,3,5-Trinitrobenzene.

U235

tris-(2,3-Dibromopropyl)-phosphate.

U236

Trypan Blue.

U237

Uracil mustard.

U238

Urethane (Ethyl carbamate).

U239

Xylenes.

U240

2,4-D (2,4-Dichlorophenoxyacetic acid).

U243

Hexachloropropylene.

U244

Thiram.

U246

Cyanogen bromide.

U247

Methoxychlor.

U248

Warfarin, & salts, when present at concentrations of 0.3 percent or less.

U249

Zinc phosphide, Zn3P2, when present at concentrations of 10 percent or less.

U271

Benomyl.10

U278

Bendiocarb.10

U279

Carbaryl.10

U280

Barban.10

U328

o-Toluidine.

U353

p-Toluidine.

U359

2-Ethoxyethanol.

U364

Bendiocarb phenol.10

U367

Carbofuran phenol.10

U372

Carbendazim.10

U373

Propham.10

U387

Prosulfocarb.10

U389

Triallate.10

U394

A2213.10

U395

Diethylene glycol, dicarbamate.10

U404

Triethylamine.10

U409

Thiophanate-methyl.10

U410

Thiodicarb.10

U411

Propoxur.10

Notes:

1 The waste descriptions provided in this table do not replace waste descriptions in 35 Ill. Adm. Code 721. Descriptions of Treatment or Regulatory Subcategories are provided, as needed, to distinguish between applicability of different standards.

2 CAS means Chemical Abstract Services. When the USEPA hazardous waste number or regulated constituents are described as a combination of a chemical with its salts or esters, the CAS number is given for the parent compound only.

3 Concentration standards for wastewaters are expressed in mg/l and are based on analysis of composite samples.

4 All treatment standards expressed as a Technology Code or combination of Technology Codes are explained in detail in Table C, "Technology Codes and Descriptions of Technology-Based Standards". "fb" inserted between USEPA hazardous waste numbers denotes "followed by", so that the first-listed treatment is followed by the second-listed treatment. A semicolon (;) separates alternative treatment schemes.

5 Except for Metals (EP or TCLP) and Cyanides (Total and Amenable), the nonwastewater treatment standards expressed as a concentration were established, in part, based on incineration in units operated in accordance with the technical requirements of Subpart O of 35 Ill. Adm. Code 724 or Subpart O of 35 Ill. Adm. Code 725 or based on combustion in fuel substitution units operating in accordance with applicable technical requirements. A facility may comply with these treatment standards according to provisions in Section 728.140(d). All concentration standards for nonwastewaters are based on analysis of grab samples.

6 Where an alternate treatment standard or set of alternate standards has been indicated, a facility may comply with this alternate standard, but only for the Treatment or Regulatory Subcategory or physical form (i.e., wastewater or nonwastewater) specified for that alternate standard.

7 Both Cyanides (Total) and Cyanides (Amenable) for nonwastewaters are to be analyzed using Method 9010C or 9012B, in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", USEPA publication number EPA-530/SW-846, incorporated by reference in 35 Ill. Adm. Code 720.111(a), with a sample size of 10 grams and a distillation time of one hour and 15 minutes.

8 These wastes, when rendered non-hazardous and then subsequently managed in CWA or CWA-equivalent systems, are not subject to treatment standards. (See Section 728.101(c)(3) and (c)(4).)

9 These wastes, when rendered non-hazardous and then subsequently injected in a Class I SDWA well, are not subject to treatment standards. (See 35 Ill. Adm. Code 738.101(d).)

10 The treatment standard for this waste may be satisfied by either meeting the constituent concentrations in the table in this Section or by treating the waste by the specified technologies: combustion, as defined by the technology code CMBST at Table C for nonwastewaters; and biodegradation, as defined by the technology code BIODG; carbon adsorption, as defined by the technology code CARBN; chemical oxidation, as defined by the technology code CHOXD; or combustion, as defined as technology code CMBST, at Table C, for wastewaters.

11 For these wastes, the definition of CMBST is limited to any of the following that have obtained a determination of equivalent treatment under Section 728.142(b): (1) combustion units operating under 35 Ill. Adm. Code 726, (2) combustion units permitted under Subpart O of 35 Ill. Adm. Code 724, or (3) combustion units operating under Subpart O of 35 Ill. Adm. Code 725.

12 Disposal of USEPA hazardous waste number K175 waste that has complied with all applicable Section 728.140 treatment standards must also be macroencapsulated in accordance with Table F, unless the waste is placed in either of the following types of facilities:

a) A RCRA Subtitle C monofill containing only K175 wastes that meet all applicable 40 CFR 268.40 treatment standards; or

b) A dedicated RCRA Subtitle C landfill cell in which all other wastes being co-disposed are at pH[LESS THAN OR EQUAL TO]6.0.

NA means not applicable.

Amended at 36 Ill. Reg. 8790, effective June 4, 2012

BOARD NOTE: Derived from table to 40 CFR 268.40 (2017).