Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 724 - STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES
Subpart F - RELEASES FROM SOLID WASTE MANAGEMENT UNITS
Section 724.195 - Point of Compliance
Universal Citation: 35 IL Admin Code ยง 724.195
Current through Register Vol. 48, No. 38, September 20, 2024
a) The Agency must specify in the facility permit the point of compliance at which the groundwater protection standard of Section 724.192 applies and at which monitoring must be conducted. The point of compliance is a vertical surface located at the hydraulically downgradient limit of the waste management area that extends down into the uppermost aquifer underlying the regulated units.
b) The waste management area is the limit projected in the horizontal plane of the area on which waste will be placed during the active life of a regulated unit.
1) The waste management area includes
horizontal space taken up by any liner, dike, or other barrier designed to
contain waste in a regulated unit.
2) If the facility contains more than one
regulated unit, the waste management area is described by an imaginary line
circumscribing the several regulated units.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
