Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 652 - COMMUNITY WATER SUPPLIES
Subpart B - CORROSION PREVENTION
Section 652.220 - Corrosion Prevention at Community Water Supplies

Current through Register Vol. 48, No. 38, September 20, 2024

a) A community water supply must use protective coatings personnel to carry out corrosion prevention and mitigation methods on the following:

1) exposed water treatment tanks, exposed non-concrete water treatment structures, exposed water treatment pipe galleys;

2) exposed pumps; and

3) generators. [415 ILCS 5/14.7(a)(2)(A)]

b) A community water supply must use inspectors to ensure that best practices and standards specified in Section 652.210are adhered to on each corrosion prevention project under this Part [415 ILCS 5/14.7(a)(2)(B)].

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.