Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 506 - LIVESTOCK WASTE REGULATIONS
Subpart C - STANDARDS FOR THE DESIGN AND CONSTRUCTION OF LIVESTOCK WASTE HANDLING FACILITIES OTHER THAN LAGOONS
Section 506.309 - Additional Wooden Material Design and Construction Standards

Current through Register Vol. 48, No. 38, September 20, 2024

a) In addition to the requirements in Section 506.304, the design and construction of wooden components of livestock waste handling facilities must meet the following requirements:

1) Wooden materials must be naturally resistant or treated to resist damage from decay and corrosion; and

2) Construction fasteners must be resistant to corrosion.

b) The owner or operator of the livestock waste handling facility may, upon written request and with written approval from the Department, modify or exceed these standards to meet site specific objectives. The owner or operator must demonstrate that such modification will be at least as protective of the groundwater, the surface water, and the structural integrity of the livestock waste handling facility as the requirements of this Part.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.