Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 506 - LIVESTOCK WASTE REGULATIONS
Subpart C - STANDARDS FOR THE DESIGN AND CONSTRUCTION OF LIVESTOCK WASTE HANDLING FACILITIES OTHER THAN LAGOONS
Section 506.306 - Additional Metal Design and Construction Standards
Universal Citation: 35 IL Admin Code ยง 506.306
Current through Register Vol. 48, No. 38, September 20, 2024
a) In addition to the requirements in Section 506.304, the design and construction of metal components of livestock waste handling facilities must meet the following requirements:
1) All metal
surfaces must be protected by a corrosion resistance system;
2) Concrete footings and bases must meet the
strength and load requirements in Sections
506.304 and
506.305;
3) The connection of dissimilar metals must
be minimized; and
4) Metal
components of livestock waste handling facilities must be constructed or
installed according to the manufacturer's specifications and
guidelines.
b) The owner or operator of the livestock waste handling facility may, upon written request and with written approval from the Department, modify or exceed the standards of this Section to meet site specific objectives. The owner or operator must demonstrate that such modification will be at least as protective of the groundwater, the surface water, and the structural integrity of the livestock waste handling facility as the requirements of this Part.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
