Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 307 - SEWER DISCHARGE CRITERIA
Subpart V - NONFERROUS METALS MANUFACTURING
Section 307.3105 - Primary Electrolytic Copper Refining
Universal Citation: 35 IL Admin Code ยง 307.3105
Current through Register Vol. 48, No. 38, September 20, 2024
a) Applicability. This Section applies to discharges resulting from the electrolytic refining of primary copper, including anode casting performed at refineries that are not located on-site with a smelter, product casting, and by-product recovery.
b) Specialized Definitions. The Board incorporates by reference 40 CFR 421.51 (2003). This incorporation includes no later amendments or editions.
c) Existing Sources. These sources must comply with the general and specific pretreatment requirements of Subpart B.
d) New Sources
1) The Board incorporates by reference
40 CFR
421.56 (2003). This incorporation includes no
later amendments or editions.
2) No
person subject to the pretreatment standards incorporated by reference in
subsection (d)(1) may cause, threaten, or allow the discharge of any
contaminant to a POTW in violation of those standards.
3) "New source" means any building,
structure, facility, or installation whose construction commenced after
February 17, 1983.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
