Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 307 - SEWER DISCHARGE CRITERIA
Subpart V - NONFERROUS METALS MANUFACTURING
Section 307.3100 - General Provisions

Universal Citation: 35 IL Admin Code ยง 307.3100

Current through Register Vol. 48, No. 38, September 20, 2024

a) Applicability. This Subpart V applies to any facility producing primary metals from ore concentrates or recovering secondary metals from recycle wastes that introduces or may introduce pollutants into a POTW. This Subpart V applies only to alloying or casting of hot metal directly from the nonferrous metals manufacturing process without cooling. Remelting followed by alloying or cooling is included in the aluminum forming, nonferrous metals forming, or metal molding and casting categories.

b) This subsection corresponds to 40 CFR 421.2, marked "reserved" by USEPA. This statement maintains structural consistency with the corresponding federal regulations.

c) Monitoring Requirements. The Board incorporates by reference 40 CFR 421.3 (2003). This incorporation includes no later amendments or editions.

d) Compliance Dates. The Board incorporates by reference 40 CFR 421.4 (2003). This incorporation includes no later amendments or editions.

e) Removal Credits. The control authority may grant removal credits under 35 Ill. Adm. Code 310. Subpart C for toxic metals limited in this Subpart V when used as indicator pollutants.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.