Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 307 - SEWER DISCHARGE CRITERIA
Subpart N - ELECTROPLATING
Section 307.2306 - Chemical Etching and Milling
Universal Citation: 35 IL Admin Code ยง 307.2306
Current through Register Vol. 48, No. 38, September 20, 2024
a) Applicability. This Section applies to discharges resulting from the chemical milling or etching of ferrous or nonferrous materials.
b) Specialized Definitions. The Board incorporates by reference 40 CFR 413.61 (2003). This incorporation includes no later amendments or editions.
c) Existing Sources
1) The Board incorporates by reference
40 CFR
413.64 (2003). This incorporation includes no
later amendments or editions.
2) No
person subject to the pretreatment standards incorporated by reference in
subsection (c)(1) may cause, threaten, or allow the discharge of any
contaminant to a POTW in violation of those standards.
d) Sources whose construction commenced after August 31, 1982 are subject to Subpart BH.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
