Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 307 - SEWER DISCHARGE CRITERIA
Subpart CL - PLASTICS MOLDING AND FORMING
Section 307.7303 - Finishing Water
Universal Citation: 35 IL Admin Code ยง 307.7303
Current through Register Vol. 48, No. 38, September 20, 2024
a) Applicability. This Section applies to the introduction into POTWs of pollutants resulting from processes in the finishing water subcategory. Processes in the finishing water subcategory are processes where water comes in contact with the plastic product during finishing.
b) Specialized Definitions. The Board incorporates by reference 40 CFR 463.31 (2003). This incorporation includes no later amendments or editions.
c) Existing Sources
1) The Board incorporates by reference
40 CFR
463.35 (2003). This incorporation includes no
later amendments or editions.
2) No
person subject to the pretreatment standards incorporated by reference in
subsection (c)(1) may cause, threaten, or allow the discharge of any
contaminant to a POTW in violation of those standards.
d) New Sources
1) The Board incorporates by reference
40 CFR
463.36 (2003). This incorporation includes no
later amendments or editions.
2) No
person subject to the pretreatment standards incorporated by reference in
subsection (d)(1) may cause, threaten, or allow the discharge of any
contaminant to a POTW in violation of those standards.
3) "New source" means any building,
structure, facility, or installation whose construction commenced after
February 15, 1984.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
