Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 307 - SEWER DISCHARGE CRITERIA
Subpart BA - GLASS MANUFACTURING
Section 307.3610 - Glass Tubing (Danner) Manufacturing
Universal Citation: 35 IL Admin Code ยง 307.3610
Current through Register Vol. 48, No. 38, September 20, 2024
a) Applicability. This Section applies to discharges resulting from the process by which raw materials are melted in a furnace and glass tubing is mechanically drawn from the furnace horizontally using the Danner process, which requires the intermittent quenching of cullet.
b) Specialized Definitions. The Board incorporates by reference 40 CFR 426.101 (2003). This incorporation includes no later amendments or editions.
c) Existing Sources. These sources must comply with the general and specific pretreatment requirements of Subpart B.
d) New Sources
1) The Board incorporates by reference
40 CFR
426.106 (2003). This incorporation includes
no later amendments or editions.
2)
No person subject to the pretreatment standards incorporated by reference in
subsection (d)(1) may cause, threaten, or allow the discharge of any
contaminant to a POTW in violation of those standards.
3) "New source" means any building,
structure, facility, or installation whose construction commenced after August
21, 1974.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
