Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 283 - GENERAL PROCEDURES FOR EMISSIONS TESTS AVERAGING
Subpart B - PROCEDURES FOR AVERAGING OF TEST RESULTS
Section 283.210 - Criteria for Averaging Tests

Universal Citation: 35 IL Admin Code ยง 283.210

Current through Register Vol. 48, No. 38, September 20, 2024

Emissions tests results for an emission unit shall be averaged to determine compliance with the applicable limitation, standard, or permit conditions, provided that all of the following conditions are met:

a) The emission unit is classified as a continuous steady-state unit, a cyclic steady-state unit, or another qualifying unit;

b) At least three valid test runs are conducted, subject, however, to the provisions of Section 283.240(c) of this Part; and

c) Each of the test runs to be averaged is performed according to the test plan submitted to the Agency prior to the test, pursuant to the provisions of Section 283.220 of this Part, or as may otherwise be modified and approved, according to the provisions of Section 283.230 of this Part.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.