Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 276 - PROCEDURES TO BE FOLLOWED IN THE PERFORMANCE OF INSPECTIONS OF MOTOR VEHICLE EMISSIONS
Subpart E - TEST EQUIPMENT SPECIFICATIONS
Section 276.501 - General Requirements
Universal Citation: 35 IL Admin Code ยง 276.501
Current through Register Vol. 48, No. 12, March 22, 2024
Compliance with Illinois vehicle test standards shall be determined by following the test procedures set forth in Subpart B of this Part and by utilizing the following:
a) Steady-state idle test equipment meeting the specifications set forth in Sections 276.502 and 276.503 of this Part and the evaporative system test equipment meeting the specifications set forth in Section 276.504 of this Part; or
b) On-road remote sensing test equipment meeting the specifications set forth in Section 276.507 of this Part; or
c) OBD test equipment meeting the specifications set forth in Section 276.508 of this Part.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
