Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 254 - ANNUAL EMISSIONS REPORT
Subpart B - REPORTING REQUIREMENTS FOR LARGE SOURCES
Section 254.203 - Contents of Subpart B Annual Emissions Report
Current through Register Vol. 48, No. 38, September 20, 2024
The Annual Emissions Report filed pursuant to this Subpart shall be limited to information requested by the Agency and required in the application for permits or renewals, including source identification information, emissions information, operating data, control device information, and exhaust point information for each regulated air pollutant emitted at the source. The information shall be provided for an individual emission unit or operation if this is also required in the application for permits or renewals. The Annual Emissions Report to be filed pursuant to this Subpart shall contain the following information, as applicable:
a) Source identification information:
b) Source-wide totals of actual emissions for all regulated air pollutants emitted by the source.
c) The following certification statement, unless another statement is required to be submitted pursuant to the source's permit: "I certify under penalty of law that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons directly responsible for gathering the information, the information submitted is, to the best of my knowledge and belief, true, accurate and complete." The certification statement shall be signed and dated by the certifying individual and accompanied by the printed full name, title, and a telephone number of the certifying individual.
d) Emissions information for each emission unit producing or capable of producing any regulated air pollutant, including:
e) Operating data for each emission unit producing or capable of producing any regulated air pollutant, including:
f) Control device information, if any changes have occurred from the Annual Emissions Report for the prior year, including:
g) Exhaust point parameters, if any changes have occurred from the Annual Emissions Report for the prior year, including:
h) Any additional data required to be reported as specified in permit condition(s) for the source.