Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 240 - MOBILE SOURCES
Subpart D - STEADY-STATE IDLE MODE TEST EMISSION STANDARDS
Section 240.153 - Compliance Determination

Current through Register Vol. 48, No. 38, September 20, 2024

Compliance shall be determined based upon the measurement of exhaust emissions using the steady-state idle test while the vehicle to be tested is operating in the idle mode. The vehicle shall pass exhaust emissions inspection if at any time during the initial idle mode or second-chance idle mode of the steady-state idle test the measured values are at or below the applicable limits of Section 240.152 of this Subpart. Vehicles failing the initial idle mode shall undergo a high idle preconditioning mode and receive a second-chance idle mode unless no measured values less than 1800 ppm HC are obtained within an elapsed time of 30 seconds.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.