Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 220 - NONMETHANE ORGANIC COMPOUNDS
Subpart B - MSW LANDFILLS
Section 220.270 - Monitoring of Operations
Current through Register Vol. 48, No. 38, September 20, 2024
a) Active gas collection systems. Each owner or operator of an active gas collection system shall install a sampling port and a thermometer, other temperature measuring device, or an access port for temperature measurements at each wellhead and:
b) Enclosed combustors. Each owner or operator of an enclosed combustor shall calibrate, maintain, and operate according to the manufacturer's specifications, the following equipment:
c) Open flare. Each owner or operator of an open flare shall install, calibrate, maintain, and operate according to the manufacturer's specifications the following equipment:
d) Each owner or operator seeking to install a collection or control system that does not meet the specifications in Section 220.220(b) or (c) of this Subpart, shall provide information satisfactory to the Agency as provided in Sections 220.220(d) and 220.230(d) of this Subpart, describing the design and operation of the collection system, the operating parameters that would indicate proper performance, and appropriate monitoring procedures.
e) Each owner or operator shall monitor surface concentrations of methane according to the instrument specifications and procedures provided in Section 220.240(c) and (d) of this Subpart. Any inactive landfill that has no monitored exceedences of the operational standard in three consecutive quarterly monitoring periods must resume annual monitoring. Any methane reading of 500 ppm or more above the background detected during the annual monitoring returns the monitoring frequency for that landfill to quarterly.