Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 219 - ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS FOR THE METRO EAST AREA
Subpart H - PRINTING AND PUBLISHING
Section 219.405 - Lithographic Printing: Applicability
Universal Citation: 35 IL Admin Code ยง 219.405
Current through Register Vol. 48, No. 38, September 20, 2024
a) Every owner or operator of lithographic printing lines is subject to the recordkeeping and reporting requirements in Section 219.411 of this Subpart.
b) Prior to August 1, 2010, Sections 219.407 through 219.410 of this Subpart shall apply to:
1) All owners
or operators of heatset web offset lithographic printing lines unless:
A) Total maximum theoretical emissions of VOM
from all heatset web offset lithographic printing lines (including solvents
used for cleanup operations associated with heatset web offset lithographic
printing lines) at the source never exceed 90.7 Mg (100 tons) per calendar year
before the application of capture systems and control devices. To determine a
source's total maximum theoretical emissions of VOM for the purposes of this
subsection (b)(1)(A), the owner or operator shall use the calculations set
forth in Section
219.411(a)(1)(C)
of this Subpart; or
B) Federally enforceable permit conditions or
SIP revision for all heatset web offset lithographic printing lines at the
source requires the owner or operator to limit production or capacity of these
printing lines to total VOM emissions of 90.7 Mg/yr (100 TPY) or less, before
the application of capture systems and control devices;
2) All owners or operators of lithographic
printing lines, unless the combined emissions of VOM from all lithographic
printing lines at the source (including solvents used for cleanup operations
associated with the lithographic printing lines never exceed 45.5 kg/day (100
lbs/day), as determined in accordance with Section
219.411(a)(1)(B),
before the application of capture systems and control devices.
c) On and after August 1, 2010:
1) The requirements in Section
219.407(a)(1)(B)
through (a)(1)(E) and
219.407(b)
and all applicable provisions in Sections
219.409
through
219.411
of this Subpart shall apply to all owners or operators of heatset web offset
lithographic printing lines, if the combined emissions of VOM from all
lithographic printing lines at the source (including solvents used for cleanup
operations associated with the lithographic printing lines) ever exceed 45.5
kg/day (100 lbs/day), calculated in accordance with Section
219.411(b)(2)(B),
before the application of capture systems and control devices;
2) The requirements in Section
219.407(a)(1)(A)
and (a)(2) through (a)(5) and all applicable
provisions in Sections
219.409
through
219.411
of this Subpart shall apply to all owners or operators of lithographic printing
lines if the combined emissions of VOM from all lithographic printing lines at
the source (including solvents used for cleanup operations associated with the
lithographic printing lines) ever equal or exceed 6.8 kg/day (15 lbs/day),
calculated in accordance with Section
219.411(b)(1)(B),
before the application of capture systems and control devices;
3) Notwithstanding subsection (c)(2) of this
Section, at sources where the combined emissions of VOM from all lithographic
printing lines at the source (including solvents used for cleanup operations
associated with the lithographic printing lines) equal or exceed 6.8 kg/day (15
lbs/day) but do not exceed 45.5 kg/day (100 lbs/day), calculated in accordance
with Section
219.411(b)(1)(B),
before the application of capture systems and control devices, the following
exclusions shall apply unless the owner or operator of the source certifies
pursuant to Section
219.411(g)(1)(B)
that the source will not make use of any
such exclusions:
A) The requirements of
Section
219.407(a)(1)(A),
(a)(2), and (a)(3) of this Subpart shall not
apply to lithographic printing lines with a total fountain solution reservoir
of less than 3.8 liters (1 gallon);
B) The requirements of Section
219.407(a)(3)
of this Subpart shall not apply to sheet-fed offset lithographic printing lines
with maximum sheet size of 11x17 inches or smaller;
C) The requirements of Section
219.407(a)(4)
of this Subpart shall not apply to up to a total of 416.3 liters (110 gallons)
per year of cleaning materials used on all lithographic printing lines at the
source;
D) The requirements of
Section
219.407(a)(4)(A)(i)
shall not apply to lithographic printing lines at the source. Instead, the
requirements of Section
219.407(a)(4)(A)(ii)
shall apply to such lines.
d) If a lithographic printing line at a source is or becomes subject to one or more of the limitations in Section 219.407 of this Subpart, the lithographic printing lines at the source are always subject to the applicable provisions of this Subpart.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
