Current through Register Vol. 48, No. 38, September 20, 2024
Any owner or operator of a coating line that elects to comply
by means of Section
219.212
of this Subpart shall establish the following:
a) By the date consistent with Section
219.210(f)
of this Subpart, or upon initial start-up of a new coating line replacing a
pre-existing coating line, as defined in Section
219.212
of this Subpart, or upon changing the method of compliance for a pre-existing
coating line from the requirements of Section
219.204 or
Section
219.207
of this Subpart to the requirements of Section
219.212
of this Subpart, the owner or operator of the source shall certify to the
Agency that each participating coating line, as determined in Section
219.212
of this Subpart, will be in compliance with Section
219.212
of this Subpart on and after a date consistent with Section
219.210(f)
of this Subpart, or on and after the initial start-up date of such
participating coating lines. Such certification shall also include:
1) The name and identification number of each
participating coating line;
2) The
name and identification number of each coating as applied on each participating
coating line;
3) The weight of VOM
per volume of each coating and the volume of each coating (minus water and any
compounds which are specifically exempted from the definition of VOM) as
applied each day on each participating coating line;
4) The instrument or method by which the
owner or operator will accurately measure or calculate the volume of each
coating as applied each day on each participating coating line;
5) The method by which the owner or operator
will create and maintain records each day as required in subsection (b) of this
Section;
6) An example of the
format in which the records required in subsection (b) of this Section will be
kept;
7) A statement that all
coatings used on participating coating lines have a VOM content less than or
equal to the applicable VOM limitation for such coating set forth within
Appendix H of this Part, and that all lines either;
A) Underwent a change in operations
incorporating a lower VOM coating on each applicable participating coating line
after the date of January 1, 1991; or
B) Are not in compliance and continued
compliance with the coating limitations in Section
219.204 of
this Subpart, compliance with which is required on or after March 15,
1996;
8) The method by
which the owner or operator has calculated K, for the equation contained in
Section
219.212(d)(2)(B)
of this Subpart, if applicable.
b) On and after a date consistent
with Section
219.210(f)
of this Subpart, or on and after the initial start-up date, the owner or
operator of a source electing to comply with the requirements of this Subpart
by means of Section
219.212
of this Subpart shall collect and record the following information on a daily
basis for each participating coating line and maintain the information at the
source for a period of three years:
1) The
name and identification number of each coating as applied on each participating
coating line;
2) The weight of VOM
per volume and the volume of each coating (minus water and any compounds which
are specifically exempted from the definition of VOM) as applied on each
participating coating line on a daily basis; and
3) The daily weighted average VOM content of
all coatings as applied on each coating line as defined at 35 Ill. Adm. Code
211.1230.
c) On and after a date consistent
with Section
219.210(f)
of this Subpart, the owner or operator of participating coating lines shall:
1) Notify the Agency within 30 days following
an occurrence of a violation of Section
219.212
of this Subpart; and
2) Send to the
Agency any record showing a violation of Section
219.212
of this Subpart within 30 days following the occurrence of a
violation.
