Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 218 - ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS FOR THE CHICAGO AREA
Subpart S - RUBBER AND MISCELLANEOUS PLASTIC PRODUCTS
Section 218.462 - Green Tire Spraying Operations
Universal Citation: 35 IL Admin Code ยง 218.462
Current through Register Vol. 48, No. 38, September 20, 2024
The owner or operator of a green tire spraying operation at a pneumatic rubber tire manufacturing source shall:
a) Install and operate:
1) A capture system with a minimum capture
efficiency of 90 percent by weight of VOM; and
2) A control device that meets the
requirements of one of the following:
A) A
carbon adsorption system designed and operated in a manner such that there is
at least 90 percent removal of VOM by weight from the gases ducted to the
control device;
B) An afterburning
system that oxidizes at least 90 percent of the captured nonmethane VOM
(measured as total combustible carbon) to carbon dioxide and water;
or
C) An alternative VOM emission
reduction system demonstrated to have at least a 90 percent overall reduction
efficiency and approved by the Agency and approved by the USEPA as a SIP
revision.
b) Substitute for the normal solvent-based mold release compound water-based sprays containing:
1) No more than five
percent by volume of VOM as applied for the inside of tires;
2) No more than ten percent by volume of VOM
as applied for the outside of tires.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
