Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 217 - NITROGEN OXIDES EMISSIONS
Subpart E - INDUSTRIAL BOILERS
Section 217.166 - Methods and Procedures for Combustion Tuning

Current through Register Vol. 48, No. 38, September 20, 2024

The owner or operator of an industrial boiler subject to the combustion tuning requirements of Section 217.164 must have combustion tuning performed on the boiler at least annually. The combustion tuning must be performed by an employee of the owner or operator or a contractor who has successfully completed a training course on the combustion tuning of boilers firing the fuel or fuels that are fired in the boiler. The owner or operator must maintain the following records that must be made available to the Agency upon request:

a) The date the combustion tuning was performed;

b) The name, title, and affiliation of the person who performed the combustion tuning;

c) Documentation demonstrating the provider of the combustion tuning training course, the dates the training course was taken, and proof of successful completion of the training course;

d) Tune-up procedure followed and checklist of items (such as burners, flame conditions, air supply, scaling on heating surface, etc.) inspected prior to the actual tune-up; and

e) Operating parameters recorded at the start and at conclusion of combustion tuning.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.