Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 215 - ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS
Subpart S - RUBBER AND MISCELLANEOUS PLASTIC PRODUCTS
Section 215.462 - Green Tire Spraying Operations
Universal Citation: 35 IL Admin Code ยง 215.462
Current through Register Vol. 48, No. 38, September 20, 2024
The owner or operator of a green tire spraying operation at a pneumatic rubber tire manufacturing facility shall:
a) Install and operate:
1) A capture system with a minimum capture
efficiency of 90 percent by weight of volatile organic material; and
2) A control device that meets the
requirements of one of the following:
A) A
carbon adsorption system designed and operated in a manner such that there is
at least 90 percent removal of volatile organic material by weight from the
bases ducted to the control device;
B) An afterburning system that oxidizes at
least 90 percent of the captured non-methane volatile organic material
(measured as total combustible carbon) to carbon dioxide and water;
or
C) An alternative volatile
organic material emission reduction system demonstrated to have at least a 90
percent overall reduction efficiency and approved by the Agency.
b) Substitute for the normal solvent-based mold release compound water-based sprays containing:
1) No more than five percent by volume of
volatile organic material as applied for the inside of tires;
2) No more than ten percent by volume of
volatile organic material as applied for the outside of tires.
Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
