Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 215 - ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS
Subpart P - PRINTING AND PUBLISHING
Section 215.401 - Flexographic and Rotogravure Printing
Current through Register Vol. 48, No. 38, September 20, 2024
No owner or operator of a packaging rotogravure, publication rotogravure or flexographic printing press subject to this rule and employing solvent-containing ink may cause or allow the operation of such press unless:
a) The volatile fraction of ink as it is applied to the substrate contains 25 percent or less by volume of organic solvent and 75 percent or more by volume of water; or
b) The volatile fraction of an ink as it is applied to the substrate, less water, is 40 percent or less by volume; or
c) The owner or operator installs and operates:
d) A capture system is used in conjunction with any of the emission control systems in subsection (c). The design and operation of the capture system must be consistent with good engineering practice and shall provide, in combination with the control equipment, an overall reduction in volatile organic material emissions of at least: