Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 211 - DEFINITIONS AND GENERAL PROVISIONS
Subpart B - DEFINITIONS
Section 211.2550 - Gas/Gas Method

Current through Register Vol. 48, No. 38, September 20, 2024

"Gas/gas method" means either of two methods for determining VOM capture efficiency which rely only on gas phase measurements. The first method requires construction of a temporary total enclosure (TTE) to ensure that all would-be fugitive emissions are measured. The second method uses the building or room which houses the coating line, printing line or other emission unit as an enclosure. The second method requires that all other VOM lines or emission units within the room be shut down while the test is performed, but all fans and blowers within the room must be operated according to normal procedures.

Disclaimer: These regulations may not be the most recent version. Illinois may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.