Illinois Administrative Code
Title 35 - ENVIRONMENTAL PROTECTION
Part 204 - PREVENTION OF SIGNIFICANT DETERIORATION
Subpart B - DEFINITIONS
Section 204.380 - Excessive Concentration
Current through Register Vol. 48, No. 38, September 20, 2024
"Excessive concentration" is defined for the purpose of determining good engineering practice stack height under Section 204.420(c) and means:
a) For sources seeking credit for stack height exceeding that established under Section 204.420(b), a maximum ground-level concentration due to emissions from a stack due in whole or part to downwash, wakes, and eddy effects produced by nearby structures or nearby terrain features that individually is at least 40 percent in excess of the maximum concentration experienced in the absence of such downwash, wakes, or eddy effects and that contributes to a total concentration, due to emissions from all sources, that is greater than an ambient air quality standard. For sources subject to this Part, an excessive concentration alternatively means a maximum ground-level concentration due to emissions from a stack due in whole or part to downwash, wakes, or eddy effects produced by nearby structures or nearby terrain features that individually is at least 40 percent in excess of the maximum concentration experienced in the absence of the downwash, wakes, or eddy effects and greater than an ambient air increment under Section 204.900. The allowable emission rate to be used in making demonstrations of excessive concentration shall be prescribed by the NSPS that is applicable to the source category unless the owner or operator demonstrates that this emission rate is infeasible. When those demonstrations are approved by the Agency, an alternative emission rate shall be established in consultation with the source owner or operator.
b) For sources seeking credit for increases in existing stack heights up to the heights established under Section 204.420(b), either:
c) For sources seeking credit for a stack height determined under Section 204.420(b) when the Agency requires the use of a field study or fluid model to verify good engineering practice stack height, for sources seeking stack height credit based on the aerodynamic influence of cooling towers, and for sources seeking stack height credit based on the aerodynamic influence of structures not adequately represented by the equations in Section 204.420(b), a maximum ground-level concentration due in whole or part to downwash, wakes or eddy effects that is at least 40 percent in excess of the maximum concentration experienced in the absence of the downwash, wakes, or eddy effects.
